Vintage Sewing Machine Shop.....Come on in and sit a spell
Super Member
Join Date: May 2010
Location: Round Rock,Texas
Posts: 6,135
I sent my Featherweight off to Arkansas this morning. She'll be coming home in a lovely shade of dark purple. I'll post pictures when she comes home.
Sharon
Sharon
Different functions.
Tri_Flow is a lubricant. it has a silicon base so even when it dries it leaves behind a lubricant (dry silicon)
Kroil is a penetrating oil. it's function is to seep into cracks and crevasses and soften any existing rust and/or contaminants. It is almost anti oil.
This stuff REALLY has a amazingly low surface tension... Take two flat plates of material. Put on one drop of other stuff (Tri-Flow, WD-40, sewing machine oil, etc) and on the other put one drop of Kroil. In a few hours you will see the Kroil one has spread out WAY more than any of the others. I buy mine from McMaster Carr http://www.mcmaster.com/
Tri_Flow is a lubricant. it has a silicon base so even when it dries it leaves behind a lubricant (dry silicon)
Kroil is a penetrating oil. it's function is to seep into cracks and crevasses and soften any existing rust and/or contaminants. It is almost anti oil.
This stuff REALLY has a amazingly low surface tension... Take two flat plates of material. Put on one drop of other stuff (Tri-Flow, WD-40, sewing machine oil, etc) and on the other put one drop of Kroil. In a few hours you will see the Kroil one has spread out WAY more than any of the others. I buy mine from McMaster Carr http://www.mcmaster.com/
~G~
Super Member
Join Date: Dec 2011
Location: Northern CA near Sacramento
Posts: 1,107
Jenn,
Brewer shows 3/16" width leather belting in a 100 foot roll retailing at $110.00. If this roll is cut into the standard 72" pieces you will get 16 pieces (plus some left over). At this price that is $6.875 each. That is about retail,, not much saving in buying a large roll.
I did a quick check on the online auction site for "LEATHER BELT SINGER TREADLE SEWING MACHINES 3/16"" and found them for about $3.00 to $4.00 each. This $3 to $4 price is lower than my wholesale price.
Cathy
Brewer shows 3/16" width leather belting in a 100 foot roll retailing at $110.00. If this roll is cut into the standard 72" pieces you will get 16 pieces (plus some left over). At this price that is $6.875 each. That is about retail,, not much saving in buying a large roll.
I did a quick check on the online auction site for "LEATHER BELT SINGER TREADLE SEWING MACHINES 3/16"" and found them for about $3.00 to $4.00 each. This $3 to $4 price is lower than my wholesale price.
Cathy
Super Member
Join Date: Feb 2012
Posts: 8,091
Tri-Flow Oils and grease that we use on sewing machines contains NO silicone. The quotes below are from the Tri-Flow home page:
{ http://www.triflowlubricants.com/index.html }
Tri-Flow[SUP]®[/SUP] Superior
[h=2]Dry Lubricant[/h] Tri-Flow[SUP]®[/SUP] Superior Dry Lubricant is an elite formula created for dry and dusty conditions. The drip bottle application, with a convenient straw, allows for deep penetration in hard to reach moving parts. Featuring paraffin wax and high-grade petroleum oil to allow the lube to go on wet, but then set up in a dry, 'wax-like' film so it will not attract or absorb grit and grime. Perfect for dry, dirty, dusty conditions, while still providing adequate wet weather performance. Holds up to extreme pressures and resists water wash-off. Provides incredible efficiency without attracting an excessive amount of contaminants.
P.T.F.E. is AKA Teflon.
Joe
{ http://www.triflowlubricants.com/index.html }
[h=2]Tri-Flow[SUP]®[/SUP] Superior Lubricant Drip Bottle[/h] Tri-Flow[SUP]®[/SUP] Superior Lubricant is the superior, light viscosity lube that allows for deep penetration into hard to reach moving parts. The drip bottle application, with a convenient straw, allows for deep penetration in hard to reach moving parts. High-grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475°F) and humidity. Formulated solvents soften and remove dirt and contaminants, while special additives displace moisture and prevent rust and corrosion. Formulated with P.T.F.E.
Tri-Flow[SUP]®[/SUP] Superior
[h=2]Dry Lubricant[/h] Tri-Flow[SUP]®[/SUP] Superior Dry Lubricant is an elite formula created for dry and dusty conditions. The drip bottle application, with a convenient straw, allows for deep penetration in hard to reach moving parts. Featuring paraffin wax and high-grade petroleum oil to allow the lube to go on wet, but then set up in a dry, 'wax-like' film so it will not attract or absorb grit and grime. Perfect for dry, dirty, dusty conditions, while still providing adequate wet weather performance. Holds up to extreme pressures and resists water wash-off. Provides incredible efficiency without attracting an excessive amount of contaminants.
[h=2]Tri-Flow[SUP]®[/SUP] Synthetic Grease[/h] Tri-Flow[SUP]®[/SUP] Clear Synthetic Grease is a premium quality, extreme pressure, non-melting, waterproof formula that seals out water contaminants. It is available in handy squeeze tube for easy application and fits nicely in a grease gun. Our grease is compatible with most rubbers and plastic and stands up to extreme temperatures (-10° - +400° F). Guaranteed to optimize the performance of your equipment's moving parts, such as bearings and tracks, and will allow them to last longer and run quieter and smoother. Prevents rusting even when exposed to salt water! Formulated with P.T.F.E.
Joe
Senior Member
Join Date: Apr 2012
Location: Jersey Shore
Posts: 528
Purple Featherweight...can't wait to see that one!
See if someone can find the answer to this! How long will Tri-Flow last? After all these years, my DH informs me he has a great deal of it in storage. The Army has used it for ages to lube guns. Would be safe to use the old stored Tri-Flow on my machines?
Very serendipitous to have this come up in conversation at home, log on to the QB and find it a hot topic here too. Love you folks!!
Very serendipitous to have this come up in conversation at home, log on to the QB and find it a hot topic here too. Love you folks!!
Super Member
Join Date: Feb 2012
Posts: 8,091
I would say, indefinitely. Regular oil lasts nearly forever in the bottle so I'd take a look see at the oil, shake it up, then see what it looks like.
~Or~ Contact Tri-Flow and ask them. They made it.
Joe
~Or~ Contact Tri-Flow and ask them. They made it.
Joe
~G~
Super Member
Join Date: Feb 2012
Posts: 8,091
Grant,
That's good to know. So it does have a shelf life. I guess I shouldn't lay in a life time supply of it then.
Joe
That's good to know. So it does have a shelf life. I guess I shouldn't lay in a life time supply of it then.
Joe
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM