Originally Posted by
miriam
If you do the spring after the bar and then go from the spring straight up to the take up lever it might do weird stuff.
That is exactly how I had it threaded. I though that is how the instructions said to... I must have been reading it wrong! I don't have time to try it now, as I have to go to work, but I will later tonight and check back.
Here is a photo, and here is the full size, where you can clearly see the route around the tensioner...
http://www.pbase.com/mchad/image/144038814/original.jpg
The only thing that is not clear is that the thread goes through the needle from right to left after the last hook at the top of the needle "holder?"
Thanks again
