OK, I hope this is seen.
First I have a correction. The machine in question is a Domestic 7000. Not a 2000. I misread the label.
Here are the pics I promised path49:
Front w/ cams:
Front a bit closer:
Top, full length:
Top, a bit closer:
Top, close up of the needle position section:
Needle position close up a:
Needle position close up b:
Now, in the pics of the machine you can see the needle R-C-L lever is centered. In the first needle close up I put a straight stitch foot on so you could see more clearly how off center it is.
In the second needle picture I removed the foot and moved the R-C-L lever to the left. You can see the needle is hitting the edge of the slot on the needle plate.
There must be an adjustment so that is what I'm trying to get assistance with.
TIA
Joe