Ken is correct, the 128 won't fit in the box made for a full sized machines.
If you are going to trash this original box/ base please save the two 'barrel' hinges. They are recessed into deep holes in the base. To remove them turn the base upside down. Look into the two holes on the underside. You should see a screw head in each hole. After removing the screws the hinges will come out from the top side. If lost those screws are difficult to replace, keep them with the hinges.
Cathy
[ATTACH=CONFIG]379649[/ATTACH][ATTACH=CONFIG]379650[/ATTACH]
Originally Posted by
pinkCastleDH
Kitty, first - the 128 won't fit a box made for a full-sized Singer. The hinges are in the wrong place. To remove the machine from the hinges tilt it back and loosen the set screws that bears on the pins that protrude from the hinges, the slide it toward you and off of the pins.