I've seen discussions of sergers in other parts of QB but not amongst our vintage selves. So, I thought I'd start one. For myself, I think sergers/overlockers/coverstitchers are very interesting machines and I'd like to learn more about them, the
other sewing machines.
So what's a 'vintage' serger? Based upon what very little I know, sergers for domestic use didn't become available to the American public until the 1960s. These early machines were small, a bit primitive (some didn't even have lamps), and were heavy and reliable. These were Baby Lock machines made by Juki in Japan.
Like standard sewing machines, the amount of plastic used in design and construction of sergers increased in the 1980s and more so in the 1990s. (This may have had to do with prices of materials and steel-making as well as increased labor costs.)
Additionally, the differential feed feature became common to most models around 1990.
So, I consider a vintage serger to be one that was made prior to about 1990. Does that seem reasonable?
Anyway, here are my three 'vintage' sergers.
And a Bernina Bernette 5-thread (probably Maruzen in Japan of Kenmore fame) from around 1987:
The Bernette was $18, also from a thrift store. It was sold 'as-is'. Because the blade was in the upward position and the front door was ajar due to a lever not quite in its proper place, the interlock power switch made the machine appear not to run. Once this was corrected, the machine runs beautifully but the upper looper and needle bar need re-timing. It came with cone supports and a carry case, power cord and pedal, but no manual. I downloaded the manual for free.
The Bernette will never win a beauty contest (particularly with its ugly integrated handle) but threading appears to be easier and with a very good threading chart behind the front sliding door. The metal door enclosing the 5th thread assembly is beautifully done. It is larger than the other two machines, though no heavier and there is a large plastic piece in front. (I'm not yet sure what it's for.) This machine has DF, a newer feature in the late '80s. This machine is a bit of a project machine, as it needs work in order to be a usable serger.
************************************
Do you own any vintage sergers? Modern sergers? What are your impressions?