View Single Post
Old 04-03-2008, 05:45 PM
  #8  
live2teach
Super Member
 
live2teach's Avatar
 
Join Date: Mar 2007
Location: Good Ole' West Virginia
Posts: 1,639
Default

Here are the directions, not that you guys couldn't figure it out. It's really simple. These directions are from the site I got them from a year or two ago, and I didn't save the website, just copied and pasted it into a word document.



Basic Sewing Instructions

You will need:
7 - 10 juice pouches (or more for a bigger purse)
Thread

You may purchase straps such as ribbon (gross grain) or anything else that catches your fancy that can be made into straps!
To Prepare Your Pouches:
Cut out the bottom of the pouch without separating the front of the pouch from the back. This is to facilitate washing the pouches throughly so they don't make a mess when you start to sew! Wash throughly with soap and water and machine dry on low setting for about 20 minutes - it takes too long to dry naturally!
We are making a small purse so we will only use 2 pouches across the front and 2 pouches across the back. If you want your purse bigger, you can use more pouches and adjust the pattern accordingly.
For the front of your purse, overlap 2 of the pouches putting them side by side. Do a zig zag stitch down the middle with the front of the pouches up (the top needle make a cleaner pattern than the bobbin side).
Do the same as above for the back of your purse.
For the bottom of your koolaid purse, overlap 2 pouches from top to bottom and zigzag stitch.
For the sides, use 1 pouch for each side.
Attach the front and back panel to each side, leaving about 1/4" to 1/2" unsewn at bottom of handbag.
Sew both side panels to the front and back of your purse.
Attach the bottom of the handbag to the bottom of your front, back, and side panels, folding down where you left the bottom unsewn. I think it is easier to attach your bag together at the sides first, then sew along the longer seams at the front and back of your bag. For handles, you can use ribbon or you can use additional juice pouches to make your own handles. Simply sew to pouches top to bottom, cut the desired width of your handles, and fold back on each long side (about 1/4") and zig zag stitch both sides.
Fold down the top of your bag about 1/2" (to hide juice drink tops and to make the top even) and, if you like, add some trim (I prefer eyelash trim - it's easy to sew and looks really cute!



IMPORTANT: to make attaching the bottom of the purse easier leave 1/4 inch at the bottom of the seam open when attaching the front/back to the sides

Straps

There are many ways to create straps for the bags. I use either 1 inch or 1 1/2 inch strips of the pouches and either zig-zag the raw edges or fold them under and zig-zag.If my straps are two pouches long I usually sew them together before cutting them into strips, but if they ar longer I will cut the strips first and then sew them to each other (always sew them together before finishing the edges using either aforementioned method).
I have also heard of using aquarium tubing filled with beads for handles. Of course you can always use ribbon, fabric or purchased handles.

(*I used nylon strap material (you can see that in the picture) I bought online. I hadn't used it before now, so I'm thrilled I got to use it.*)

In the picture with the directions, the woman also made a purse with a flap, and also made them out of the koolaid Jammers. There cute!
live2teach is offline