Removing Melted Insulation
I recently picked up a 15-91, when I went to take her out of the cabinet I got handful of grease. Might have stopped there, but she is cosmetically near perfect, she was free and she deserved some attention. So she came home with me.
When I took the hand wheel off I couldn't believe how much grease someone had put in there. This actually made me hopeful, maybe the grease was all from here and the motor would be clean. Unfortunately, someone had also put grease in the brush housings. The motor is salvageable, a lot of time and hundreds of q-tips and it is all cleaned and ready for re-wiring.
But back to the exterior of the machine, the grease just flowed down the pillar, over the badge, serial number and front decals. Looks like black puffy paint was dripped on her. I've nearly got the decals cleaned using just sewing machine oil and giving it lots of time. But there is an area that I'm fairly sure is at least partly dissolved/melted insulation and it is rather thick. Any suggestions for removing this?