View Single Post
Old 02-15-2021, 09:16 AM
  #3  
Binnes1985
Member
 
Join Date: Feb 2021
Posts: 2
Default

Originally Posted by OurWorkbench View Post
When you say "it works fine with just the crank" are you referring to it sewing smoothly with the hand wheel? If you remove the belt and run the motor, does the pulley spin? Is it possible the belt is too tight or does the belt slip?

We like pictures. In order to post pictures on Quilting Board, you will probably need to reduce or compress the picture to a file size that is smaller than 2MB. How to post images can be found at https://www.quiltingboard.com/attach...020-01-17-.pdf
Don't forget to scroll over to the far right to find and click on the "Upload" button.

I have found that only the big red "Reply" button or "Quote" work to give me the paper clip icon to work for adding pictures.
https://www.quiltingboard.com/attach...p-location.jpg

Some additional info regarding reducing images at post #4 and images for the scroll and upload button can be found at #5 of quilt block ID?

Janey - Neat people never make the exciting discoveries I do.

Thank you very much for your reply

Yes the wheel works perfectly by turning the wheel by hand and stitches perfectly also doing so.

When I take the belt off the small black plastic "wheel" attached to the motor is now very very stiff
Binnes1985 is offline