I would like to find a simple serger
#1
Senior Member
Thread Starter
Join Date: Jan 2011
Location: Richmond, VA
Posts: 601
I would like to find a simple serger
My ASG group shows how wonderful sergers are to finish edges, but I know I will not learn anything too complicated. How can I identify a "simple" serger that will do just the one thing well?
#2
Super Member
Join Date: Apr 2007
Location: Alturas, CA
Posts: 9,393
Just like sewing machines, find an old one, old BabyLok sergers were/are workhorses, mine probably has a million miles on it, has been serviced once, simply because I thought it deserved it. I don't use it much now, but I'm not getting rid of it.
#3
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Sergers are complicated -- more complicated than sewing machines. What types of edges are you wanting to finish?
How good are your eyes and eye-hand coordination? You typically have to thread 1 upper thread and 2 loopers, and the loopers can be tricky. If you don't want to have to deal with threading, then you need to buy an air-threading serger such as the Babylock Imagine.
The only "simple" serger I know of is the coverstitch serger, which creates hems like those on the bottom of t-shirts. But I don't think a coverstitch serger would be able to do rolled hems (like on napkins) or simply seam garments together (which creates a seam with covered edges). To do those, you need a regular serger. You can leave a regular serger set up to do rolled edges, but even then you would probably want to know how to re-thread it if a thread breaks.
How good are your eyes and eye-hand coordination? You typically have to thread 1 upper thread and 2 loopers, and the loopers can be tricky. If you don't want to have to deal with threading, then you need to buy an air-threading serger such as the Babylock Imagine.
The only "simple" serger I know of is the coverstitch serger, which creates hems like those on the bottom of t-shirts. But I don't think a coverstitch serger would be able to do rolled hems (like on napkins) or simply seam garments together (which creates a seam with covered edges). To do those, you need a regular serger. You can leave a regular serger set up to do rolled edges, but even then you would probably want to know how to re-thread it if a thread breaks.
Last edited by Prism99; 12-10-2017 at 06:00 PM.
#4
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,646
All together, I've accumulated six sergers - I think the "newest" one is a Husqvarna Huskylock 905.
If there is a lever to help with threading the upper (I think) looper - it makes the threading much easier.
My very old BabyLock and Pfaff Hobbylock do not have that - and those two are - at times - very c-h-a-l-l-e-n-g-i-n-g to thread. A tip that has helped a lot. - I put fray check on the end of the thread to stiffen it up a bit - and that helps quite a bit with the threading.
I paid less than $50 each for three of them.
If there is a lever to help with threading the upper (I think) looper - it makes the threading much easier.
My very old BabyLock and Pfaff Hobbylock do not have that - and those two are - at times - very c-h-a-l-l-e-n-g-i-n-g to thread. A tip that has helped a lot. - I put fray check on the end of the thread to stiffen it up a bit - and that helps quite a bit with the threading.
I paid less than $50 each for three of them.
#5
Senior Member
Thread Starter
Join Date: Jan 2011
Location: Richmond, VA
Posts: 601
I thank you all for this input -- I suspect what I need (for my limited patience and brainpower) is a higher end machine that does way more than I need, but helps me more to do it. Make sense? I just don't want to pay what it's worth.
All I think I want to do is finish raw edges, on clothing or crafting items. Long ago I was content with zig zag, but on knits that is ugly, and not really a solution.
All I think I want to do is finish raw edges, on clothing or crafting items. Long ago I was content with zig zag, but on knits that is ugly, and not really a solution.
#6
Super Member
Join Date: Feb 2010
Location: Winchester, Tn.
Posts: 1,522
I have a Janome serger that I bought at least 20 years ago and it is still going strong. It is a 4 thread (2 needles and 2 loopers) and I bought the extra long needle threader to use to thread one of the loopers. I paid $250.00 for it. I always found it user friendly.
#8
Senior Member
Thread Starter
Join Date: Jan 2011
Location: Richmond, VA
Posts: 601
After doing a whole lot of comparison shopping and research, I have decided to go with a Brother 1034D -- lower end, but we have an authorized repair shop near here. I decided to buy it from Walmart, after reading horror stories about trying to get service or replacement, thru Brother or thru Amazon. I know Walmart will honor a return, plus they offer a 4-yr service plan, which the maker does not. I hate how mom and pop stores are gone because of Walmart, but you just can't beat the prices and service!
#9
Super Member
Join Date: Jul 2010
Location: Desert Southwest
Posts: 1,314
A Singer serger was with a Bernina and Koala sewing table I bought, used, 4 years ago. It sat for too long because I thought the threading was too complicated. The threading sequence is color-coded and printed on the machine. It's part of the machine and every step is indicated on the threading area. I also printed the manual from the internet. Between those two things I find the threading can be done without tears! Threading is not complicated. It just needs to be done correctly and in the correct sequence. Take your time, follow the instructions. You'll be fine.
#10
Super Member
Join Date: Feb 2011
Location: Rhode Island
Posts: 1,663
Lee, that's the serger I was going to recommend. I've had many sergers over the years and the Brother 1034D is my favorite, hands down. Easy to use and no stitch problems whatsoever. In fact, I loved it so much I also bought the Brother Cover Stitch machine, the 2340CV. Good luck with your new serger!
Almost forgot... here's a picture of my two "girls" together.
Almost forgot... here's a picture of my two "girls" together.
Last edited by DonnaC; 12-11-2017 at 09:04 AM.
Thread
Thread Starter
Forum
Replies
Last Post
bloocar
For Vintage & Antique Machine Enthusiasts
13
02-27-2013 06:31 AM
Linda-in-iowa
General Chit-Chat (non-quilting talk)
18
03-20-2011 04:01 PM