Question about starch
08-04-2014, 05:15 PM
#11
Junior Member
Thread Starter
Join Date: May 2014
Location: Glasgow, Scotland
Posts: 105
Thanks for all the suggestions. I have a couple of old duvet covers that are about to be put in the rubbish so I might try to make something to go over the new cover. The freezer paper is also a great idea; will need to see if its available here in the UK (I've never heard of it!).
Thanks again!
Thanks again!
08-05-2014, 05:17 AM
#12
Super Member
Join Date: Mar 2013
Location: Hernando FL
Posts: 1,662
I do several things to keep my ironing area clean. I try not to spray around my ironing board. If I'm going to spray near my ironing board I use a small sprayer that I got at a beauty supply place designed for hair spray and it sprays a very fine directed mist.
To starch I spray and then roll my fabric and let it sit for a while for the starch to absorb into the fibers. By doing this when I iron it the fabric is slightly damp. If you spray and then iron immediately the fabric is more wet and you get flakes and starch coming off onto your ironing surface.
I use a piece of muslin over my ironing surface when I am pressing things that have been starched. That way I can easily throw it in the washer when needed.
Best Press has an ingredient that speeds up the absorption into the fibers process and I've noticed that it leaves less residue on ironing surfaces - both on the board and on the iron. It's pricy but I do like it.
To clean my iron I use a Mr. Clean Magic Eraser (or other brand). Wet the eraser and use on a cold iron. Works great! I have a shiny sole plate on my iron. I don't know how it would work on a coated sole plate iron.
To starch I spray and then roll my fabric and let it sit for a while for the starch to absorb into the fibers. By doing this when I iron it the fabric is slightly damp. If you spray and then iron immediately the fabric is more wet and you get flakes and starch coming off onto your ironing surface.
I use a piece of muslin over my ironing surface when I am pressing things that have been starched. That way I can easily throw it in the washer when needed.
Best Press has an ingredient that speeds up the absorption into the fibers process and I've noticed that it leaves less residue on ironing surfaces - both on the board and on the iron. It's pricy but I do like it.
To clean my iron I use a Mr. Clean Magic Eraser (or other brand). Wet the eraser and use on a cold iron. Works great! I have a shiny sole plate on my iron. I don't know how it would work on a coated sole plate iron.
08-05-2014, 05:18 AM
#13
Senior Member
Join Date: Oct 2010
Posts: 405
I recently read an article on making a cover. so I am in the process of making one. Using an old sheet. make it double layer and make so you can put elastic on edges. this makes it reversible and easy on and off. hope I get it to work.
08-06-2014, 06:35 AM
#16
Super Member
Join Date: Jul 2010
Location: East Arkansas
Posts: 2,534
Originally Posted by Tartan
I iron a square of freezer paper to my main ironing area first thing after replacing my cover. The freezer paper sticks fir quite a while and when it gets nasty, I peel it off and stick on a new square. I have also heard that taking the bottom off of a large brown paper bag makes a sleeve to slip on an ironing board if that is your ironing surface.
This is what I do now - sure saves time/trouble. I have a piece of plywood 4' x 2' covered laying on my table. Just iron on freezer paper and I'm good to go.
08-06-2014, 10:08 AM
#17
Super Member
Join Date: Jul 2010
Location: Central Willamette Valley, Oregon, USA
Posts: 7,695
Originally Posted by Fifee
How do you stop spray starch from ruining your ironing board?
This might be considered a stupid question but please bare in mind that I've never used starch in my life before starting quilting. Since using spray starch the cover for my ironing board has become incredibly stiff and even torn in places due to the amount of starch thats accumulated on it over the past while. I realise that I will now have to buy a new one but how do I protect the new one from ending up like the current one?
Silly question I know!
This might be considered a stupid question but please bare in mind that I've never used starch in my life before starting quilting. Since using spray starch the cover for my ironing board has become incredibly stiff and even torn in places due to the amount of starch thats accumulated on it over the past while. I realise that I will now have to buy a new one but how do I protect the new one from ending up like the current one?
Silly question I know!
Thread
Thread Starter
Forum
Replies
Last Post
woohoowendy
Main
12
04-02-2011 02:02 AM
