Go Back  Quiltingboard Forums >
  • Main
  • Another Applique question.  Turned or Raw >
  • Another Applique question. Turned or Raw

  • Another Applique question. Turned or Raw

    Thread Tools
     
    Old 04-03-2011, 02:04 PM
      #1  
    Senior Member
    Thread Starter
     
    familyfun's Avatar
     
    Join Date: Mar 2011
    Location: Central Ohio
    Posts: 523
    Default

    Hello everyone. I have came back for somemore advice form the experts. I started my dear jane quilt yesturday and have 14 blocks done. I started with the easy one first and used pp.
    I am not good at applique. I threw away my first two projects because they looked terrible. I decided to do machine applique on a dj block and I think it looks horrible so I watched somemore videos on line and thought I would raw fray edge a couple of them. I was wondering if you think it will cause a problem in the future. I have no idea how well it holds up. I dont see this quilt being washed everyweek. But over time how well does fray edge stay. I used a very small stich 1.2
    For some reason my machine would not do the applique stich it was putting a zag in it. So I decided to straight stitch. What do you all think ?
    I am also going to post other blocks on pic page

    Machine applique with messed up stitching
    [ATTACH=CONFIG]179167[/ATTACH]

    raw edge
    [ATTACH=CONFIG]179168[/ATTACH]

    another raw edge
    [ATTACH=CONFIG]179169[/ATTACH]
    Attached Thumbnails attachment-179161.jpe   attachment-179162.jpe   attachment-179163.jpe  
    familyfun is offline  
    Old 04-03-2011, 02:13 PM
      #2  
    Power Poster
     
    amma's Avatar
     
    Join Date: Jul 2007
    Location: Out searching for some sunshine :-)
    Posts: 58,856
    Default

    The stitch with the "zig" in it will hold up longer than the frayed edge will IMHO
    I stitch right alongside the edge of the applique and then let the zig go over onto the applique piece. I like how it looks done this way and it protects the edges better, again JMHO :D:D:D

    Here are some videos on applique, you may find them helpful
    http://www.critterpat.com/content.php?content_id=1007
    amma is offline  
    Old 04-03-2011, 02:17 PM
      #3  
    Super Member
     
    dream56's Avatar
     
    Join Date: Apr 2010
    Location: Indiana, PA
    Posts: 1,320
    Default

    I like either the turned edge with stitching or a satin stitch around - like Amma said too loose of stitching around raw edge won't hold up as long.
    dream56 is offline  
    Old 04-03-2011, 03:24 PM
      #4  
    Power Poster
     
    Join Date: Jun 2009
    Location: Perth, Western Australia
    Posts: 10,357
    Default

    I prefer to applique by hand, turning the edge under. I can't see the raw edge holding up well at all and imho could blur the edges of the design.
    earthwalker is offline  
    Old 04-03-2011, 04:29 PM
      #5  
    Super Member
     
    jayelee's Avatar
     
    Join Date: Jul 2010
    Location: Chaumont NY
    Posts: 1,127
    Default

    I raw edge applique but I use Heat and Bond lite and a blanket stitch
    jayelee is offline  
    Old 04-03-2011, 04:42 PM
      #6  
    Senior Member
    Thread Starter
     
    familyfun's Avatar
     
    Join Date: Mar 2011
    Location: Central Ohio
    Posts: 523
    Default

    Thank you for your replies. I think I will go back to the drawing board and redo these blocks.
    familyfun is offline  
    Old 04-04-2011, 04:00 AM
      #7  
    Banned
     
    Join Date: Mar 2010
    Location: Sturbridge, Ma
    Posts: 3,992
    Default

    are you using a template with either a no melt plastic or other template material to turn your edges over. Perfect Shape from The Stencil Co or Templar (ususlly found in shops) is a method to turn edges and press them down. This gives a nice crisp edge. There is also a method using freezer paper or a pellon type material. This is good to use whether you do by hand or machine.
    Also, straight stitch or raw edge, to me, would be out of character of the ret of the Dear Jane quilt as the style is mide 1800's.
    Holice is offline  
    Old 04-04-2011, 05:03 AM
      #8  
    Power Poster
     
    Join Date: Feb 2009
    Location: Northern Michigan
    Posts: 12,861
    Default

    normally a fusable product is used when doing raw-edge applique- that is why it is not turned under- and the fusable protects those edges- after fusing to the background a satin stitch or blind hem stitch or zigzag is usually used to go around the block. the fusable keeps the edges from fraying and pulling away with wear and laundering
    if you do not want to use a fusable another way to do it would be to use either lightweight muslin or tule...place right sides together= stitch around the applique piece- cut a slit into the muslin (or tule) and turn the block so the muslin is on the back and you have a finished edge on your applique pieces. then you can stitch them down any way you want to with no raw edges.
    ckcowl is offline  
    Old 04-04-2011, 05:26 AM
      #9  
    Power Poster
     
    dunster's Avatar
     
    Join Date: Mar 2009
    Location: Lake Elsinore, CA
    Posts: 15,239
    Default

    You are so brave, attempting a DJ quilt. I do think that you would be happier, in the long run, if you practice your needle turn applique and use it for the DJ quilt, which is a showcase for really intricate blocks. Find someone who does really good needle turn and ask them to help you perfect yours. Don't get me wrong, because I have seen many quilts that were gorgeous with raw edge applique, or machine applique. I just don't think I would use those methods on the DJ.
    dunster is offline  
    Old 04-04-2011, 05:55 AM
      #10  
    Super Member
     
    Join Date: Jan 2011
    Posts: 1,812
    Default

    I also have used Heat n Bond for applique. This is how I learned to do applique. I use the zig zag satin stitch on my machine and the quilts have been washed with no problems. My machine also has the applique stitch that I have used on quilts and wallhangings. The stitches you have used are wonderful for wallhangings. They add texture and character. I think you are doing what all 'learners' do, so you are on your way! It takes lots of block scraps and different edges of applique and practice. You may even come up with your own signature stitch and technique. I personally wouldn't do the main project until you have the stitch you are looking for. (It is no fun ripping stitches or having to discard anything. Also, those 'throwaways' can be used toward doll quilts, scrap quilts, dog beds, etc.) For quilts that take a lot of use, especially childrens, it would be beneficial to take the time to learn to do needle turning. The edges of the applique are more secure, and if the project is a gift, you wouldnt have to be concerned about the receiver washing it.
    NanaCsews2 is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Kwiltr
    Main
    28
    10-19-2018 05:30 AM
    doowopddbop
    Pictures
    64
    02-20-2012 07:49 AM
    craftybear
    Links and Resources
    1
    11-13-2010 09:27 PM
    ljptexas
    Main
    6
    04-02-2010 09:22 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter