Go Back  Quiltingboard Forums >
  • Main
  • Any tips on hand-sewing large circles? >
  • Any tips on hand-sewing large circles?

  • Any tips on hand-sewing large circles?

    Thread Tools
     
    Old 06-03-2015, 11:25 AM
      #1  
    Member
    Thread Starter
     
    Join Date: Feb 2014
    Posts: 3
    Default Any tips on hand-sewing large circles?

    My wife and I are finally ready to do the quilting on a quilt she started for my daughter 5 years ago. She's the sewing master - I'm just the heavy lifter and technician.

    We finally have the sandwich pinned - it's got two layers of the thickest poly batting my daughter could find. (And we're in Arizona?? Oh, well - it's what she wanted!) My daughter marked out very large circles (from 6 to 12 inches diameter) on top that she wants done in various colors of embroidery thread (DMC six-strand).

    We bought a Flynn frame to put this in so my wife could hand-quilt, but then decided it was going to be too much fiddlin' around to get it mounted. It's 72 by 85, and doesn't roll up well. So then I bought a Dritz PVC floor stand from JoAnn. Had to tie the side "clamps" on to get them to stay down over the quilt!

    The problem is how to maintain the circle on the bottom? We can get a nice circle on top where we can see and follow the lines. But there's nothing marked on the bottom, and we couldn't see it if there were! We can put the needle down through the top, and push it back up on the line, but there's not guarentee we're getting a smooth circle underneath.

    Any ideas are most welcome!
    Ed
    EdNerd is offline  
    Old 06-03-2015, 11:39 AM
      #2  
    Power Poster
     
    Join Date: Mar 2011
    Location: Ontario, Canada
    Posts: 41,538
    Default

    Since the batt is so thick you can't do a rocking hand quilt stitch. When that is the case you have to stab stitch which it sounds like you are doing? That is when you push the needle down from the top and pull it out the bottom and then come back up through the sandwich for the next stitch. When I stab stitch through thick spots on a quilt, I use my long pins around the area I am working on to anchor the layers together, this helps to keep the fabric layers from moving as I stitch.Since your sandwich is extra thick you may need long thin corsage pins to do the same? Try and keep your needle going straight down rather then at an angle.
    Tartan is offline  
    Old 06-03-2015, 11:42 AM
      #3  
    Senior Member
     
    Join Date: Dec 2012
    Location: Arkansas
    Posts: 559
    Default

    Have you all hand quilted before? if reassurance is necessary, one can always use a mirror to inspect their efforts.
    personally, I have confidence that what I work from the top through the sandwich will be as lovely on the bottom as the top. As long as one is sure the stitches are going all the way through the sandwich, it should be fine, it takes practice to do the rocking stitch but the result is very satisfying.
    adamae is offline  
    Old 06-03-2015, 12:48 PM
      #4  
    Member
    Thread Starter
     
    Join Date: Feb 2014
    Posts: 3
    Default

    Never hand quilted before. My wife has done some sewing, not much quilting. (I used to be a mechanic at a Wrangler jeans factory.) Not too worried about shifting as long as we go straight down and through and and up - but any kind of running or rocking stitch could be problematic, trying to squish down all the batting.

    It's not so much anchoring the layers into place to avoid shifting as it is making sure we've got a smooth circle on the bottom. Thought maybe I should sit underneath so I can see where to poke the needle back up??

    Ed
    EdNerd is offline  
    Old 06-03-2015, 01:24 PM
      #5  
    Super Member
     
    Join Date: Mar 2011
    Location: Central NJ
    Posts: 5,571
    Default

    When you are poking back up from the bottom just make sure you are as straight as possible from your previous stitch (until you are rounding edges, of course). I think that's about the best you can hope for in this situation. And lets face it, you're going to be looking at the top side of the quilt, right? Not the back side on a regular basis??? And even though you are using poly batts, you will probably still get a tiny bit of shrinkage after it's washed and absolutely no one will be able to see if your circles are completely round on the back!
    NJ Quilter is offline  
    Old 06-03-2015, 01:24 PM
      #6  
    Super Member
     
    Join Date: May 2013
    Location: Ballwin, MO
    Posts: 4,256
    Default

    Since you're stab stitching the quit, I wonder if it would be easier to do it in a lap-size hoop so you could turn it over to see what you're doing on the bottom. However, you'll run into trouble with those pins using a small hoop; thread-basting is a better option for hoop quilting. I've never worked with so much batting, but I wonder if you couldn't do some big stitch quilting using a rocking stitch? The only options I see for your present set up are to rig up a mirror so you can see the quilt bottom, or one of you get under the quilt.
    joe'smom is offline  
    Old 06-03-2015, 02:03 PM
      #7  
    Senior Member
     
    Join Date: Dec 2012
    Location: Arkansas
    Posts: 559
    Default

    Ed, you are putting us on, aren't you?by all means, sit under the quilt...and provide pictures!

    Last edited by adamae; 06-03-2015 at 02:06 PM. Reason: add on
    adamae is offline  
    Old 06-03-2015, 02:34 PM
      #8  
    Power Poster
     
    Join Date: Mar 2009
    Posts: 15,639
    Default

    You could cut out the circle in the right size out of freezer paper and iron it to the top. Then use wash-away thread in the top and bottom and sew around the freezer paper. Remove the paper. Now you can see the circle outline and don't have to worry about the basting stitches as they will wash out.
    MadQuilter is offline  
    Old 06-03-2015, 03:20 PM
      #9  
    Super Member
     
    Join Date: Oct 2011
    Location: dallas tx.
    Posts: 5,172
    Default

    I'm wondering like Adamae. Sounds fishy to me too. Would love to see pics.ha,ha.
    barny is offline  
    Old 06-03-2015, 03:27 PM
      #10  
    Super Member
     
    GEMRM's Avatar
     
    Join Date: Nov 2011
    Location: South West Ontario
    Posts: 2,237
    Default

    Or, you could quilt the top with one layer of batting, then do the bottom with one layer of batting, then tie them together, or join in some other manner.
    GEMRM is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    virtualbernie
    Pictures
    172
    12-18-2012 07:34 AM
    tammy cosper
    Pictures
    19
    06-13-2011 08:40 PM
    JanetLW
    Main
    14
    03-25-2011 12:46 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter