Best pressing station
12-29-2016, 05:31 AM
#1
Junior Member
Thread Starter
Join Date: Oct 2013
Posts: 280
Best pressing station
When I saw the post about what is the best cutting table, I realize this would be the best place to ask what is the pressing station. I am building a new house with a dedicated sewing room and will be outfitting it with new furniture. I'd like it to be fairly wide--at least 48" and maybe 24" deep with a height of around 33-35". It might be nice to be on wheels as well. If anyone has pictures of ones they like, that would be great.
12-29-2016, 08:59 AM
#2
Power Poster
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
Make your own! Since you are building, order a couple extra base cabinets and have your finish carpenter join them and add wheels. Make sure at least one of the wheels is locking. Have him (or her 
) also cut a piece of plywood for the top. There are lots of instructions on the internet for making an ironing surface on the plywood.
https://customstyle.wordpress.com/20...ironing-table/
) also cut a piece of plywood for the top. There are lots of instructions on the internet for making an ironing surface on the plywood.https://customstyle.wordpress.com/20...ironing-table/
Last edited by PaperPrincess; 12-29-2016 at 09:02 AM.
12-29-2016, 10:15 AM
#3
Super Member
Join Date: Aug 2011
Location: Valley of the sun, AZ
Posts: 1,070
Make your own! Since you are building, order a couple extra base cabinets and have your finish carpenter join them and add wheels. Make sure at least one of the wheels is locking. Have him (or her ) also cut a piece of plywood for the top. There are lots of instructions on the internet for making an ironing surface on the plywood.
https://customstyle.wordpress.com/20...ironing-table/
) also cut a piece of plywood for the top. There are lots of instructions on the internet for making an ironing surface on the plywood.https://customstyle.wordpress.com/20...ironing-table/
So I just spent at least 30 minutes viewing! very interesting blog
12-29-2016, 07:08 PM
#5
Super Member
Join Date: Jan 2009
Location: East TN
Posts: 2,733
I used a 2' by 4' piece of underlayment from Lowe's (about $6) and covered it with lining and scrap batting, then made a cover like a pillowcase so I could take it off and wash it. The case fabric was from the clearance shelf at Jo-Ann, and is home decorator weight. I can put it on any surface to iron, then slide it behind something if I don't need it, meaning I don't have valuable real estate locked into an ironing station. I think I have less than $15 in the whole thing.
[ATTACH=CONFIG]564591[/ATTACH]
[ATTACH=CONFIG]564591[/ATTACH]
12-29-2016, 07:31 PM
#6
Super Member
Join Date: Aug 2010
Location: Tampa Bay Area, Florida
Posts: 2,229
I would recommend you have one built to meet your needs. My husband built mine to match the cutting station he built me, it has the compartments and details that are what I need, and the height that's best for me because I am 5ft nothing
12-29-2016, 07:43 PM
#7
Super Member
Join Date: Mar 2011
Location: Central NJ
Posts: 5,571
I used a 2' by 4' piece of underlayment from Lowe's (about $6) and covered it with lining and scrap batting, then made a cover like a pillowcase so I could take it off and wash it. The case fabric was from the clearance shelf at Jo-Ann, and is home decorator weight. I can put it on any surface to iron, then slide it behind something if I don't need it, meaning I don't have valuable real estate locked into an ironing station. I think I have less than $15 in the whole thing.
[ATTACH=CONFIG]564591[/ATTACH]
[ATTACH=CONFIG]564591[/ATTACH]
12-30-2016, 04:56 AM
#8
Junior Member
Thread Starter
Join Date: Oct 2013
Posts: 280
Make your own! Since you are building, order a couple extra base cabinets and have your finish carpenter join them and add wheels. Make sure at least one of the wheels is locking. Have him (or her ) also cut a piece of plywood for the top. There are lots of instructions on the internet for making an ironing surface on the plywood.
https://customstyle.wordpress.com/20...ironing-table/
) also cut a piece of plywood for the top. There are lots of instructions on the internet for making an ironing surface on the plywood.https://customstyle.wordpress.com/20...ironing-table/
Yes, that is a good idea to have matching ones of the house cabinets. I also liked reading the blog that you attached. Good information for making your own. Thanks!
12-31-2016, 05:17 AM
#9
Super Member
Join Date: Feb 2011
Location: Houston, TX
Posts: 7,312
Make your own! Since you are building, order a couple extra base cabinets and have your finish carpenter join them and add wheels. Make sure at least one of the wheels is locking. Have him (or her ) also cut a piece of plywood for the top. There are lots of instructions on the internet for making an ironing surface on the plywood.
https://customstyle.wordpress.com/20...ironing-table/
) also cut a piece of plywood for the top. There are lots of instructions on the internet for making an ironing surface on the plywood.https://customstyle.wordpress.com/20...ironing-table/
12-31-2016, 06:06 AM
#10
Junior Member
Join Date: Mar 2015
Location: Upstate NY
Posts: 218
My husband and I made an ironing board like the one in the link. However, I covered it with heavy duck cloth. It was made to fit over my ironing board. However, I found a dining room server at an auction and it now sits on top of that. The server is on wheels and has one long drawer which holds quilting rulers, four small draws for sissors, pins, etc. and space in the middle for whatever.
Thread
Thread Starter
Forum
Replies
Last Post
gale
Main
11
05-16-2015 05:45 AM
