Go Back  Quiltingboard Forums > Main
Time senstivie question about basting spray . . >

Time senstivie question about basting spray . .

Time senstivie question about basting spray . .

Thread Tools
 
Old 10-02-2010, 01:06 PM
  #1  
Senior Member
Thread Starter
 
cminor's Avatar
 
Join Date: Nov 2009
Location: Port Washington, WI
Posts: 718
Default

Ok, I am all set. I put together a really easy baby blanket for a friend at work and I just got the spray from Joannes. No - not the good 501 spray - but this is my first try.

What are the tips that will make this go better? I am going to start this in about a half hour or so . .

What do you think??
cminor is offline  
Old 10-02-2010, 01:21 PM
  #2  
Senior Member
 
Katia's Avatar
 
Join Date: Feb 2010
Location: Nevada
Posts: 650
Default

Cover everything in the room. Wear a mask. Better yet do it outside. Make sure you have everything pressed and ready. An extra set of hands always helps.

At least this is what I came up with the other day when I was trying to spray baste in my sewing room. I had my big cutting table up and thought everything was ready to go. The fact that I could not get around my table without moving it, proved to be a big problem. I actually got stuck behind the table and had to call my husband in to help. I did get it done, then flipped it over and the back is a mess. So now I have to pull that up, I hope and redo it. Then I had to air out the room because I had a bad headache. Plus my nose was literaly stuck together inside, yuck. And I had to scrub down my desk and keyboard and other things that had been over sprayed. What a mess.

My husband told me we need to figure out a better way to put quilts together. I told him he could buy me a long arm set up and that would help. No good, didn't fall for that. So I told him about how someone had mentioned a ping pong table. He thought that sounded great and said we need to start looking for one. I have room on the back porch to be able to do it, and it can be put away when I don't need it. So now I am on a quest for a ping pong table.
Katia is offline  
Old 10-02-2010, 01:36 PM
  #3  
Banned
 
Join Date: Mar 2010
Location: Sturbridge, Ma
Posts: 3,992
Default

There was a show on The Quilt Show about spray basting on the wall. It looks doable.
I have an 8x4" piece of plywood cut in half that I put on the dining table, cover with a sheet and put newspaper all around it to spray baste.
You need to cover completely with spray but ot sturate the backing and batting. Tape or pin the batting down so it won't wrinkle.
I also found that after spraying all layers then to iron the back. The heat will loosen the spray and enable you to smooth the backing out. Do this for the top if it needs it.
Also, when you lay out the layers, smooth all down very good and then fold 1/2 of top and batting and do 1/2 at the time. Don't try and start at the top when flat on the table. This helps to smooth. Then while holding the layer start in the middle and smooth down and out.
The segment on The Quilt Show used 505 and said she had a quilt that had been spray basted 5 yrs ago and was still plyable. Be sure the spray says "temporary".
Holice is offline  
Old 10-02-2010, 01:45 PM
  #4  
Senior Member
 
redvette54's Avatar
 
Join Date: Aug 2010
Location: Michigan
Posts: 681
Default

I just did my first sandwiching using spray and had to work on the floor. You really can't tape your backing to carpet and I didn't like the way the backing was bunching up, so I starched the heck out of it. I'm happy with using the spray and will be looking for a ping pong table.
redvette54 is offline  
Old 10-02-2010, 01:45 PM
  #5  
Super Member
 
cuppi duke's Avatar
 
Join Date: Feb 2010
Location: payette, idaho
Posts: 2,242
Default

Someone(I think it's Patsy Thompson) has a great video on the web about spray basting. She does it on her wall. I use my bed and just cover it with newspapers before I start laying my quilt down to spray. Also, a little goes a long ways. Don't oversaturate it, you are just wasting glue. I hope this helps.
cuppi duke is offline  
Old 10-02-2010, 01:59 PM
  #6  
Senior Member
Thread Starter
 
cminor's Avatar
 
Join Date: Nov 2009
Location: Port Washington, WI
Posts: 718
Default

Thanks for all the advice. I did a search quick before I started and saw how to be careful with it getting all over. I cut up a couple boxes, put them on the floor of the garage and it worked great.

That has to be the best 10 bucks I have spent in a while!!

Pictures later once I finish it all up :)
cminor is offline  
Old 10-02-2010, 02:22 PM
  #7  
Senior Member
 
pstoner's Avatar
 
Join Date: Mar 2010
Location: Solon, Iowa
Posts: 860
Default

Originally Posted by cminor
Ok, I am all set. I put together a really easy baby blanket for a friend at work and I just got the spray from Joannes. No - not the good 501 spray - but this is my first try.

What are the tips that will make this go better? I am going to start this in about a half hour or so . .

What do you think??
Ok but don't laugh at me, I use my DH hay rack- it 9' x 16' using thumb tacks I pull it tight lay out the batting and top then fold the end half way back (top and batting only) spray the backing, starting in the center doing only an arm's reach at a time. Then fold and smooth the batting over the sprayed section, then spray the batting and smooth the top down. I repeat this process until I reach one end.

Then move to the other end and start over. I also use safety pins as I go just to make sure it stays secure.
pstoner is offline  
Old 10-02-2010, 05:26 PM
  #8  
Power Poster
 
Join Date: Nov 2007
Location: SW Iowa
Posts: 32,855
Default

Originally Posted by cminor
Thanks for all the advice. I did a search quick before I started and saw how to be careful with it getting all over. I cut up a couple boxes, put them on the floor of the garage and it worked great.

That has to be the best 10 bucks I have spent in a while!!

Pictures later once I finish it all up :)
I'm glad it worked well for you. I decided to try it a while ago and I was hooked. I love the way it works.
littlehud is offline  
Old 10-03-2010, 07:21 AM
  #9  
Senior Member
 
Join Date: Apr 2010
Posts: 405
Default

Try doing it on your garage door. It'll save your back, take care of the fumes, and give your neighbors something new to talk about.
madelinkk is offline  
Old 10-03-2010, 08:17 AM
  #10  
Junior Member
 
quilterken's Avatar
 
Join Date: Jul 2010
Location: Nova Scotia, Canada
Posts: 260
Default

I love 505 basting spray for runners, art quilts, but never use it in a baby quilt. I just worried about that new fresh skin having a reaction with the chemicals. It doesn't wash out of your quilt and have you ever tried to get it off your hands.
quilterken is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GEMRM
Main
20
07-04-2019 04:42 PM
Sailorwoman
Main
2
08-15-2013 07:31 PM
krysti
Main
60
03-25-2012 11:22 AM
Baren*eh*ked_canadian
Main
17
04-13-2011 09:24 PM
craftybear
Links and Resources
1
12-28-2010 02:28 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter