Crooked stitches with Janome MC8200
#21
Super Member
Join Date: Jul 2008
Location: Keller, TX
Posts: 1,937
I have a HD9 V2 straight stitch only machine, sews through leather, 16 plus layers of fabric, not that I would, has a large Bobbin with a quarter more thread. Most sewists a re buying this machine for purses, totes, jeans, upholstery, boat covers and quilting. You do have to oil it alot. But only takes 4 tiny drops in 4 places. The Bobbins are metal, and cost a little more, but this machine is worth it. REMEBER ALL JANOMES, along with other brands made over seas, are going up on price now. And the dealers have put out warning notices that machines will be scarce due to shipping issues. Check the dealers. The HD9 runs at 1600 stitches per minute. Fast Machine, good straight stitch, no zig zag. You can do FMQ and ruler work in this Machine. You can get extra feet for industrial machines for very low prices. Lots to offer. Check out the HD9 facebook group
#22
Junior Member
Join Date: Feb 2011
Location: Dallas, GA
Posts: 232
Microtex needles (generally for piecing, not quilting) and starched fabric (harder to pierce than unstarched??? Perhaps a trial run with a Schmetz chrome size 90 quilting needle may produce a more consistent stitch.
#23
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,559
I have no idea how much a Janome MC8200 goes for, so I can't tell you if all "similarly priced machines" are the same. But I will tell you that my Brother 1500 is an awesome machine with a perfect stitch. It's mechanical and straight-stitch only.
#24
Super Member
Join Date: Jan 2015
Posts: 2,867
I agree that the only way to get a truly straight seam is with a straight stitch only machine. I have three vintage machines set up. My straightest stitcher is a Singer 15 clone made for Montgomery Wards - probably from the 50s. My 1949 Necchi is another. The slant needle Singers are very good, but not as perfect as the two mentioned.
#25
Member
Join Date: Feb 2021
Posts: 37
I have Janome machines, I worked in a Janome shop and sold them. They are a good machine. I switched to Bernina machines for my own studio just because of the reason you stated. My complaint is more the jagged (herringbone) looking stitch that I think comes more with the drop in bobbin and the tension they produce. I think your pictures may be more related to the type of fabric used. I think the straight stitch only machines are a good option. I am happy with my stitch on my Berninas.
#26
Super Member
Join Date: Jul 2013
Location: Houston, TX
Posts: 9,734
FYI, the 2200 QVP Mini was discontinued fairly quickly and had been replaced with the 18QVP (which offers improved lighting and adds a micro lift adjustment for the presser foot, but is otherwise a 2010).
The 2020PE is a silver-finished 2010 with several additional feet (mostly hopping feet for the US market; garment making for the Japanese market).
The 2020PE is a silver-finished 2010 with several additional feet (mostly hopping feet for the US market; garment making for the Japanese market).
#27
Senior Member
Join Date: Jan 2013
Posts: 990
The 18QVP and 2020 do have the new replaceable tool plate next to the throat plate (for attaching things like binding tools, seam guides, etc.. Instead of just threaded screw holes in the machine casting, there's a plate insert that can be replaced if the screw holes wear out. Did the 2200 have that?
I've been researching straight stitch machines since I've gotten into more home dec sewing (but not enough to justify an industrial machine).
#29
Super Member
Join Date: Aug 2010
Location: Upstate New York
Posts: 1,231
No..you can get better stitches on that, (or any) machine. I suspect that your presser foot is riding too high and the fabric is shifting as you sew..look in your owners manual and see if there's an adjustment for the presser foot...also, check to see if your screw that attaches the foot is tight....also, make sure you're using the correct needle and that it's up into the needle bar all the way.
Last edited by donna13350; 09-25-2021 at 11:43 AM. Reason: added info on needle
#30
Super Member
Join Date: Jul 2008
Location: Keller, TX
Posts: 1,937
You didn't say if you were using the accufeed foot or not. Your batting seems puffy, an accufeed foot may help, and also moving your needle. If your needle is.closer to feed dogs, I heard that helps too. But accufeed foot would help.