Design board - self adhesive to the wall
#11
I had one of those... I wasn't real satisfied w/it. It was suppose to be one that could be taken off & used repeatedly, but it left a residue on the wall & it didn't restick very well.
Originally Posted by stchenfool
Has anyone come across a design wall that is large and requires no pounding of nails in the wall? I saw one advertised somewhere and now I can't find out where I put the darn ad. I think it was cloth or vinal that adheres to the wall with some kind of stuff that makes it stick without nails or frame. Can you all help me out? Thanks
#12
Here is what I discovered just yesterday..........505 quilting spray will adhere flannel to a door or wall.I covered the back of my door with the same flannel as my design wall. I can use it for smaller projects . The adhesive washes away easily if you remove the flannel!!I sprayed the back of the door, then smoothed the flannel in place.I had to lift it in a few places, and it stuck back down easily!!!
Ditter
Ditter
#14
Junior Member
Join Date: Sep 2009
Location: Carolinas
Posts: 239
I also made my own. Bought 2 sheets of 1/2 inch foam insulation and cut them so I have a 6 ft x 6 ft design wall. I covered it with flannel and used double stick tape to attach to the wall. It works great!
#15
I used a 4 x 8 piece of batt board (from home depot). stretched a piece of batting to the back and tacked it down, then stretched a piece of flannel to the back and tacked it down. When stood up in my sewing room (8' ceilings), the board is wedged tight between the floor and the ceiling. No need to attach it to the wall - it is stuck!
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
6
08-22-2011 05:12 PM
craftybear
Main
35
05-20-2011 01:45 PM