Design Wall Fabric
#11
I pinned a queen sized Hobbs thin batting to my wall. It works great. I have almost my whole quilt up there, and I have only had one or two blocks fall, usually when I am working around my long arm and brush by them. They stay on great. I used old sewing machine needles from my long arm to hang it with, but after realized that thumb tacks would have been better.
#14
Batting stretched around two 4x8 or 4x6 sheets of wall board. They can be stuck in a corner when not in use or leaned against the wall. Pins go in easily. Lightweight blocks stick without pins. Easy and quite reasonably priced.
#16
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,827
You can also purchase a flannel fabric with a grid on it. I think it's about 2" apart. It's really nice for getting your pieces all lined up square.
Here's a picture of the design wall at the LQS when I was doing my OBW. It was sure a plus that we each had our own design wall to work with as we made our hexes.
[ATTACH=CONFIG]255333[/ATTACH]
#18
Thanks for all the suggestions. I have a design wall but the quilt blocks fall off. I don't want to have to pin so I think the flannel that was used is too light. I will continue to watch this topic and read the great suggestions.
#19
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,827
Originally Posted by Shirlrh
Thanks for all the suggestions. I have a design wall but the quilt blocks fall off. I don't want to have to pin so I think the flannel that was used is too light. I will continue to watch this topic and read the great suggestions.
It sold me on the fleece as being the "right" way to go.
It just takes a swipe of the hand when putting the blocks onto the design wall. I have the luxury of a permanent mounted design wall. Those with sheets/fleece/batting just hanging, where you can't do the swipe so easily probably won't have things stick as easily .... or as long!
#20
Guest
Join Date: Sep 2009
Location: Maryland
Posts: 1,148
I wonder if you would please post a pic? Thanks.
Originally Posted by tellabella
Since I sew drapes I buy interlining/flannel used for silk panels, etc and I used 2 widths of this (54 inch widths) sewn together, the height of and width of one entire wall in my sewing room...I sew a small 1 inch rod pocket, top and bottom, inserted a thin 1/4 inch or so, Roman Blind plastic dowel type stick through the 2 rod pockets and put it up with thumb tacks..has been holding up fine..so far...and is extremely helpful for quilting
Thread
Thread Starter
Forum
Replies
Last Post
Chester the bunny
Main
10
10-28-2011 03:13 PM
craftybear
Links and Resources
6
08-22-2011 05:12 PM
craftybear
Main
35
05-20-2011 01:45 PM
craftybear
Links and Resources
5
05-18-2011 07:04 AM