Diagonal lines ?
02-17-2012, 02:51 PM
#2
Super Member
Join Date: Mar 2008
Location: Hopewell, VA (for the moment anyway)
Posts: 1,692
I've used blue painter's tape and hand quilted along the edge in order to keep it straight. I know others will give you even better tips. Good luck and don't forget to post a picture when you are done! 
02-17-2012, 02:53 PM
#3
Power Poster
Join Date: Feb 2009
Location: home again, after 27 yrs!
Posts: 19,388
someone here just posted a gorgeous photo of diagonal stitched lines. it was a close up of a block with red in it. applique i think. she used tape too.
you can also mark straight lines with a long ruler and a Hera marker. that is a plastic hand held tool that indents marks and you have nothing to wash out. even JoAnn's sells those.
you can also mark straight lines with a long ruler and a Hera marker. that is a plastic hand held tool that indents marks and you have nothing to wash out. even JoAnn's sells those.
02-17-2012, 05:00 PM
#5
Super Member
Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 1,547
I use a disappearing ink marker to mark the lines then quilt on the lines. If you are hand quilting the lines might disappear before you finish your project so mark as you go. If you are machine quilting, the marks can last up to 48 hours but I have had them disappear within a few hours. It probably depends on the temperature and humidity. They wash out in the washer but don't iron over the marks before you wash them out or you might set the ink permenantly.
02-17-2012, 05:32 PM
#6
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
If machine quilting, I would heavily starch both the backing and the top before layering. This would help prevent the bias from stretching as you stitch. I like blue painter's tape for straight lines.
02-17-2012, 07:02 PM
#7
Member
Join Date: Jan 2011
Location: Olathe, KS
Posts: 97
As I have not yet tackled the challenge of freemotion quilting I do diagonal lines on all mine with a walking foot. I have drawn with (supposedly) washable pencil, eyeballed it from corner to corner on square blocks, used painters tape, and most recently tried the hera tool. The hera is my favorite! I used it after I had sandwiched my quilt and basted with safety pins. It worked really well with my hars wood floors. I will try again - this time without the sandwich and hope for the same results. You'll be fine! Just baste well.
02-17-2012, 07:09 PM
#8
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,535
The lines on the diagonal (bias) may stretch so just be careful sewing them. You can use painter's tape to mark one line across. My Bernina has a little hole in the back of the foot that you can put a bar in. The bar lets you follow the first line stitching at regular intervals across the quilt. It works well if your machine has that feature. If not, just do more lines of painter's tape or mark with a long ruler with a erasable pen. Always try your pen/pencil on a scrap to check if it's really erasable first.
02-17-2012, 07:18 PM
#9
Member
Join Date: Jan 2012
Location: Beautiful Northwest Washington
Posts: 19
You know, I recently did cross-hatch quilting lines on a wall hanging, and because I didn't have any painter's tape handy, I used disappearing ink to draw a line from one corner to the other (diagonally across my quilt, so that I ended up with a big X in the area where I wanted to do the cross-hatch quilting), sewed along those lines (very quickly, before the ink disappeared 
), and then used the edge guide that came with my machine (a metal piece that extends out from the foot of my machine, and can be adjusted so that it follows the edge of the fabric when sewing a wide hem, etc.) to follow the lines I had already stitched, at 1 1/2" intervals (I also switched directions each time I sewed a line, so that my fabric didn't shift too much one direction or the other). It worked pretty slick, and saved me from having to run to the store for painter's tape 
), and then used the edge guide that came with my machine (a metal piece that extends out from the foot of my machine, and can be adjusted so that it follows the edge of the fabric when sewing a wide hem, etc.) to follow the lines I had already stitched, at 1 1/2" intervals (I also switched directions each time I sewed a line, so that my fabric didn't shift too much one direction or the other). It worked pretty slick, and saved me from having to run to the store for painter's tape
02-17-2012, 08:01 PM
#10
Super Member
Join Date: Jun 2010
Location: Renton, WA
Posts: 2,045
I have used diagonals on just about all the baby quilts I make. I use my Omnigrid yardstick to make the lines 1 1/2 inches wide. My favorite marker is the blue washable marker. I always make test marks on all the fabrics used in the quilt before I start piecing. Then when I am ready to mark, I get the test marks wet with cold water to double check they will come out. I have ironed over them and the marks still come out, but I wouldn't recommend this as the directions say not to. Anyway, I like to use a converging chevron pattern, so that begining X gets filled in on all sides with diagonals. I use my walking foot to follow the marked lines. After it is bound, I agitate the quilt in cold water, spin that out, then wash with warm. Into the dryer and it is done.
Thread
Thread Starter
Forum
Replies
Last Post
