Flannel/Felt Design Board
#42
Super Member
Join Date: Feb 2009
Location: la la land
Posts: 2,173
My husband took a piece of warm & white batting and took trim board and tacked the board on the wall and when we move all he has to do is remove the tack trim and voila the quilt batting comes off to use in a quilt. I thought he was BRILLIANT!!! I love my design wall it is floor to ceiling! If you need to see a pix PM me and I will post one for you. It is wonderful & simple!
#43
Super Member
Join Date: Feb 2009
Location: la la land
Posts: 2,173
My husband took a piece of warm & white batting and took trim board and tacked the board on the wall and when we move all he has to do is remove the tack trim and voila the quilt batting comes off to use in a quilt. I thought he was BRILLIANT!!! I love my design wall it is floor to ceiling! If you need to see a pix PM me and I will post one for you. It is wonderful & simple!
#44
Super Member
Thread Starter
Join Date: Jan 2008
Location: currently central new jersey
Posts: 8,623
lacelady -
EDIT: i miscalculated. the walls are 9' tall. so it would take 3 sheets, not 2. 2 across and then 1 split in half to go to the ceiling. remember, my quilts are 98 X 98, oversized queens, and the purpose is to see the entire layout. even with that, the quilt would lay on the floor a little. so it's $156 + for each panel x 3.
i corrected myself. yes. ideally i want 100 x 100. the wall gives me 12' wide and 9' tall. that allows me to lay out an oversized queen (i like 98 x 98 ) or even a king. in order to cover that space, it takes two panels of 6 x 6 across and another panel of 6 x 6 cut in half to go across the tops of the other two in order to fill that gap. one flat king-size sheet almost, not quite, fills in the whole space. when i compare the prices, i can't justify the justify the difference, even though it may be much better for the job. even good quality batting would cost less on sale with a coupon.
Originally Posted by butterflywing
Originally Posted by butterflywing
to cover my wall, it would take two sheets (with very little trimming top and bottom) of 6 x 6. that's over $150+/- with shipping. i think i'll try flannel first.
#46
My son made me a design wall out of soundboard (at Home Depot). He reinforced it on the back with .5 x 2 inch boards. Then I covered it with batting from Wal Mart (first I used the cheap kind in the package, now they don't carry that so on the next one I used the regular $3.90?/yd batting) and it works great. You can stick even the thinest flower pins in the soundboard. Without pins it works only with a lightweight block. The board just rests up against the wall at a slight angle.
#48
Super Member
Thread Starter
Join Date: Jan 2008
Location: currently central new jersey
Posts: 8,623
Originally Posted by sandybeach
My son made me a design wall out of soundboard (at Home Depot). He reinforced it on the back with .5 x 2 inch boards. Then I covered it with batting from Wal Mart (first I used the cheap kind in the package, now they don't carry that so on the next one I used the regular $3.90?/yd batting) and it works great. You can stick even the thinest flower pins in the soundboard. Without pins it works only with a lightweight block. The board just rests up against the wall at a slight angle.
#49
Originally Posted by butterflywing
Originally Posted by butterflywing
to cover my wall, it would take two sheets (with very little trimming top and bottom) of 6 x 6. that's over $150+/- with shipping. i think i'll try flannel first.
#50
Senior Member
Join Date: Jan 2008
Location: Nebraska
Posts: 405
Originally Posted by Lacelady
I use a product called Block Butler. It looks like batting, but arrives with plastic on both sides, because it is tacky both sides. You have to peel the plastic back and apply it to a wall, door or whatever. It is totally removeable if you need to take it off, and when you peel off the other sheet of plastic, it is nice and tacky to hold your blocks. It won't be as inexpensive as just flannel, but flannel never worked for me. I have no connection with this product, other than I am a very happy user and can recommend it.
OK, I tried my Block Butler on painted wall. It WILL NOT STICK, I taped it with plastic tape, carton sealing tape, painter's tape, and masking tape. NOTHING will stick to it ---ALSO MY QUILT BLOCKS will not stick to it!!!?????#$%**
I e-mailed the company, and NOT heard back. I followed all the instructions and suggestion including: "Wait for it to acclimate"???? to it's new environment, spritz with water to "restore" it's properties, etc. The only thing I haven't been able to try is that it is supposed to stick to porous surfaces better - my sewing room walls are painted with semi-gloss paint, but didn't stick to my flat painted living room wall either.
I"M DISAPPOINTED!! And $$$ poorer. :) :)
Thread
Thread Starter
Forum
Replies
Last Post
Elisabrat
Main
9
07-10-2012 07:26 AM