Go Back  Quiltingboard Forums >
  • Main
  • FMQ w/one speed machine >
  • FMQ w/one speed machine

  • FMQ w/one speed machine

    Thread Tools
     
    Old 11-14-2019, 03:59 AM
      #1  
    Member
    Thread Starter
     
    Join Date: Nov 2019
    Posts: 17
    Default FMQ w/one speed machine

    Does anyone have any suggestions in controlling the speed on a machine that you cannot adjust it? I have a Baby Lock Jazz II and it is fast. I'm a beginner quilter and learning how to free motion quilt and I cannot get my hands and feet in a cohesive speed. I realize a lot of this is something that I need to learn. A repairman told me to tape a metal disk on the foot pedal to prevent me from pushing down the entire way. It worked for a little while but the disk kept slipping off. I might need a better tape than packing. Any suggestions? Thank you.

    I do okay with the walking foot.
    Donna Klinger is offline  
    Old 11-14-2019, 05:28 AM
      #2  
    Power Poster
     
    Join Date: Mar 2011
    Location: Ontario, Canada
    Posts: 41,535
    Default

    When I used my old machine that I could not adjust the speed, I did use a little block of wood to prevent my foot pedal from going down all the way. I duct taped it to the pedal so the pedal would only go down a little.
    Tartan is offline  
    Old 11-14-2019, 05:53 AM
      #3  
    Super Member
     
    juliasb's Avatar
     
    Join Date: Jun 2010
    Location: Waterford Michigan
    Posts: 7,241
    Default

    It does sound like you need a new foot pedal for your machine that will let you have control to accelerate. or slow down. it doesn't make sense how it slows down with the walking foot.
    juliasb is offline  
    Old 11-14-2019, 08:17 AM
      #4  
    Member
     
    Join Date: Apr 2019
    Posts: 65
    Default

    I know exactly what you mean. Hard to focus/coordinate your hands and foot both while doing something different with each. Sometimes I go faster and faster until I lose control. And since your Jazz has no electronic speed control, it would naturally be even harder.

    The idea of taping something to the pedal to limit the movement until you get the practice hours in is certainly a possibility. I also wonder if an electronics/electrical shop can sell you something that allows you to adjust power coming in to the machine. Years ago we had these little boxes that you could plug a lamp into that allowed you to increase or decrease the light. I think it was a simple rheostat control. This would not be good for a computerized machine, but for a purely mechanical machine it might work. Perhaps inquire at an electronics shop or electrical supply store if something like that still exists and if it would be appropriate on a mechanical machine like this.
    Sharon5012 is offline  
    Old 11-14-2019, 08:21 AM
      #5  
    Member
     
    Join Date: Apr 2019
    Posts: 65
    Default

    One more thing....I have heard there is an adjustment inside the foot control for these AC types. You might could adjust it down, and leave it that way for a couple weeks/months while practicing, then turn it back up when you feel ready. It would slow down all your sewing during that time period, of course, but might be worth it overall. Just another thought.
    Sharon5012 is offline  
    Old 11-14-2019, 08:34 AM
      #6  
    Member
    Thread Starter
     
    Join Date: Nov 2019
    Posts: 17
    Default

    Thank you all for the insight and suggestions. Possibly the easiest is to cut a piece of wood the right size for the foot pedal and tape it on. I'll see how long that lasts. Just practicing will help, for sure. Thanks again.
    Donna Klinger is offline  
    Old 11-14-2019, 04:29 PM
      #7  
    Power Poster
     
    Jingle's Avatar
     
    Join Date: Dec 2009
    Location: Outside St. Louis
    Posts: 38,224
    Default

    Lots of practice is the best way. I just try not to push the foot pedal down all the way.
    Jingle is offline  
    Old 11-14-2019, 06:49 PM
      #8  
    mkc
    Senior Member
     
    Join Date: Jan 2013
    Posts: 989
    Default

    I had to go look after the comments here - very surprised that the Jazz does not have a speed control.
    mkc is offline  
    Old 11-15-2019, 09:10 AM
      #9  
    Super Member
     
    Join Date: Jul 2010
    Location: Flagstaff, Arizona
    Posts: 9,475
    Default

    I think you may need a new foot pedal like others have said. This happened to me and the speed was out of control and going so fast on my machine. I took it to the LQS and they replaced the foot pedal and what a relief to control the speed on my machine.
    Jordan is offline  
    Old 11-16-2019, 10:11 AM
      #10  
    Super Member
     
    Join Date: Dec 2009
    Location: Somewhere in Time
    Posts: 2,697
    Default

    I sew barefoot and find it easy to reduce the pressure applied to the foot control. I can actually sew one stitch at a time, if I choose.
    Aurora is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    quiltlady1941
    Main
    23
    05-13-2015 11:02 AM
    SlightlyOffQuilter
    Tutorials
    29
    08-30-2014 09:54 PM
    BLady
    Main
    4
    08-11-2011 07:51 PM
    Deb watkins
    Main
    17
    06-25-2010 05:08 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter