Foam board design wall - staples or thumbtacks?
10-25-2018, 10:31 AM
#1
Junior Member
Thread Starter
Join Date: Jun 2014
Location: Farmington Hills, Michigan
Posts: 266
Foam board design wall - staples or thumbtacks?
I just bought a couple of 4x8 sheets of 1" thick foam insulation to make a design wall, & I'm debating what I want to use to fasten the batting to it. I'd really like to use my trusty staple gun, but wondering if the staples would pull out too easily. And then I wondered about using thumbtacks...
Anyone here ever use staples to make one of these, and how did it work?
Anyone here ever use staples to make one of these, and how did it work?
10-25-2018, 10:45 AM
#2
Super Member
Join Date: Aug 2018
Location: Peoria, IL -- Midwest Transplant
Posts: 7,314
Sorry I don't have much experience with design walls, not much wall space available in my small house and waaay too much animal hair...
So I understand the question/concern better, the batting will be more or less permanent and what you use to stick the fabric to? I can see how that would work. My friends have used flannel or the specialty fabrics.
Edit: I should mention that I have been thinking about covering the back of the door to my sewing room to use as a design wall, it's not much space but the pets aren't allowed in there anyway. I'm going to be making some modern/contemporary quilts that are a departure from my typical traditional approach and could use some help laying them out and/or putting them in sewing order. Currently I use my queen sized bed for such things, but obviously I have demands on the bed that aren't on the back of the door!
So I understand the question/concern better, the batting will be more or less permanent and what you use to stick the fabric to? I can see how that would work. My friends have used flannel or the specialty fabrics.
Edit: I should mention that I have been thinking about covering the back of the door to my sewing room to use as a design wall, it's not much space but the pets aren't allowed in there anyway. I'm going to be making some modern/contemporary quilts that are a departure from my typical traditional approach and could use some help laying them out and/or putting them in sewing order. Currently I use my queen sized bed for such things, but obviously I have demands on the bed that aren't on the back of the door!
Last edited by Iceblossom; 10-25-2018 at 10:50 AM.
10-25-2018, 11:10 AM
#4
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 18,358
SherylM ... As you have recognized, I agree, that staples and/or thumbtacks would probably pull out too easily.
There are some permanent spray glues that would probably hold it tight.
I'm not so sure that 505 or other basting sprays would hold tight, and it might peel off on you.
I'd probably go for good ol' duct tape!
IceBlossom ... yes, go for the back of your door for a starter. Something is better than nothing!
Another forgotten about possibility are closet doors.
If you should happen to have a double door or slider ... double the space!
Another possibility is corroplast, covered with fleece (or flannelette).
Tucks in nicely behind furniture or under beds, etc. when not in use.
I started with a piece of flannelette taped to a wall with painters tape to prove the merits.
I soon upgraded to fleece on the wall .... and was totally sold.
Now ... ..... 10ft wall, floor to ceiling design wall, plus several portable ones for smaller projects.
Once you have one ... you will soon have others!
There are some permanent spray glues that would probably hold it tight.
I'm not so sure that 505 or other basting sprays would hold tight, and it might peel off on you.
I'd probably go for good ol' duct tape!
IceBlossom ... yes, go for the back of your door for a starter. Something is better than nothing!
Another forgotten about possibility are closet doors.
If you should happen to have a double door or slider ... double the space!
Another possibility is corroplast, covered with fleece (or flannelette).
Tucks in nicely behind furniture or under beds, etc. when not in use.
I started with a piece of flannelette taped to a wall with painters tape to prove the merits.
I soon upgraded to fleece on the wall .... and was totally sold.
Now ... ..... 10ft wall, floor to ceiling design wall, plus several portable ones for smaller projects.
Once you have one ... you will soon have others!
10-25-2018, 12:18 PM
#5
Super Member
Join Date: Sep 2011
Location: Ohio
Posts: 3,046
I merely wrapped the batting around to the back of my foam insulation boards and stapled the batting to the back. I then took small appropriate length finishing nails and nails to my wall.....I can fit a king size quilt on there and have never experienced any loose batting. I do take a lint brush and remove all the threads left behind after each quilt, never had a issue.
10-25-2018, 12:29 PM
#6
Junior Member
Thread Starter
Join Date: Jun 2014
Location: Farmington Hills, Michigan
Posts: 266
IceBlossom - yes, the batting will be permanently fastened to the foam board. Two months ago we moved from the four bedroom house we lived in for 30 years to a two bedroom condo, so now I'm setting up my new sewing room. In the house, I just used large pushpins to fasten the batting right to the wall, but obviously that's not ideal. And we're renting and the landlord probably wouldn't appreciate it.
I've got some chemical sensitivities so spray adhesives are out, and besides, we're on the second floor and other than the balcony, there's no place to do anything like that.
QuiltE, I think I might give the duct tape a try - I just found a brand new roll of it when I was unpacking. And I agree - once you've had a design wall, it's hard to quilt without one!
In the house, I just used large pushpins to fasten the batting right to the wall, but obviously that's not ideal. And we're renting and the landlord probably wouldn't appreciate it.I've got some chemical sensitivities so spray adhesives are out, and besides, we're on the second floor and other than the balcony, there's no place to do anything like that.
QuiltE, I think I might give the duct tape a try - I just found a brand new roll of it when I was unpacking. And I agree - once you've had a design wall, it's hard to quilt without one!
Last edited by SherylM; 10-25-2018 at 12:38 PM.
10-25-2018, 12:35 PM
#7
Junior Member
Thread Starter
Join Date: Jun 2014
Location: Farmington Hills, Michigan
Posts: 266
), I'm gonna try that first. If it doesn't work, I'll use the duct tape.
10-25-2018, 12:40 PM
#8
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 18,358
you have your the duct tape all ready and waiting!
Recognizing your downsizing, maybe the corroplast option would be less space demanding
and give you more flexibility?
While I know you love your staple gun, it won't work for that, but a regular stapler
(but heavy duty!) would do the job ... and of course, duct tape as your fall back!
Last edited by QuiltE; 10-25-2018 at 12:42 PM.
10-25-2018, 12:40 PM
#9
Super Member
Join Date: Aug 2013
Posts: 9,299
I have a design “wall” of 4 foam boards, and originality my plan was to hang it permanently. But I have found it very handy to lean them against the wall (i don’t make big quilts) and add to the width with more boards when necessary. Also mskes them portable so I can set them up next to my machine whenever I want.
I use batting and pin it on with straight daisyhead pins, if I need that last piece of batting, it’s there.
If I were renting and the design was something to be really big, I’d use duct tape to affix the batting , and Command strips to hold the boards up.
I think batting would tear away from staples.
I use batting and pin it on with straight daisyhead pins, if I need that last piece of batting, it’s there.
If I were renting and the design was something to be really big, I’d use duct tape to affix the batting , and Command strips to hold the boards up.
I think batting would tear away from staples.
Thread
Thread Starter
Forum
Replies
Last Post
Yarn or Fabric
Main
14
09-04-2012 03:05 AM
Olivia's Grammy
General Chit-Chat (non-quilting talk)
40
05-21-2011 02:36 AM
