Half Square Triangle help!!!
#21
Originally Posted by kluedesigns
i do the same thing as the previous post -
i have a ruler from fons and porter that you place on the square and you draw the line down both side and then just cut them apart.
i have a ruler from fons and porter that you place on the square and you draw the line down both side and then just cut them apart.
#22
Super Member
Join Date: Jan 2008
Location: currently central new jersey
Posts: 8,623
if you're planning to make your square and cut it in half diagonally, remember that you need to add seam allowances where the stitching will go. in other words, it won't work. you either need to use the drawn line method, which already takes the seam allowance into account, or cut triangles which have been made larger by taking the seam allowances into account from the get-go.
as for staying 1/4' away from the drawn line, just practice a little bit. you just need confidence.
as for staying 1/4' away from the drawn line, just practice a little bit. you just need confidence.
#23
Super Member
Join Date: Aug 2007
Location: Clay Springs AZ
Posts: 3,229
I use the Fons and Porter 1/2 in ruler on occasion. The long one works well with the big squares to make 8 at a time. That way you dont need to judge 1/4 inch for each side of a drawn line since you just sew on the lines.
#24
The WonderCut ruler is the best thing I've found to make a lot of half square triangles fast. Sew two strips of fabric together and then cut along the ruler. You have perfect HSTs.
http://www.wondercutruler.com/
Some say it's pricey I say getting frustrated and wasting fabric is way pricer. :wink:
http://www.wondercutruler.com/
Some say it's pricey I say getting frustrated and wasting fabric is way pricer. :wink:
#26
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,654
Originally Posted by zennia
i do like the others and draw the lines but i also cut my fabric bigger then it says. If pattern calls for 2 7/8 i cut it either 3 or 3 1/2 sew it and then square it up to 2.5. I always cut it bigger then called for.
I like to think I am an accurate sewer, but this still works better for me.
I do waste a little fabric, but my squares made with the triangles are nice and consistenet after trimming.
The trimming is a good TV project!
#27
these triangles are done best with that aqua tool we all use.
Fons and porter have one too.
just put your two squares together and run that line down both side, sew on the lines and wala, done, with no fretting with bias edges.
Do get the right finished block size you want you have to ad 7/8" to the block size.
Right girls?
simple quilter
Fons and porter have one too.
just put your two squares together and run that line down both side, sew on the lines and wala, done, with no fretting with bias edges.
Do get the right finished block size you want you have to ad 7/8" to the block size.
Right girls?
simple quilter
#28
Member
Join Date: Nov 2008
Posts: 4
Well, Kirsten, you certainly can sew the seam on the long edge of the triangle after cutting the square in half diagonally. However, then you are sewing a bias seam which easily stretches. I have had the most luck with a few other techniques: Cutting the square a bit larger, doing the diagonal line with stitching 1/4 inch on either side as you describe, cutting between the stitching, opening to the square, pressing carefully (usually to the darker side), and trimming the resulting squares to size. I also really like using paper like "Thangles" or whatever brand has the squares with the stitching lines printed - usually comes in sheets that can be cut to as many squares as you need. With either of these methods, one pins the darker and lighter pairs of fabrics to the paper on which you stitch.I run my stitching just inside the printed line to be sure the square is at least big enough and not skimpy - the 1/4 inch is not as important as the size of the square when finished! Then cut between the stitching which gives about 1/4 inch seam allowances. Again, although the paper pattern is very accurate, I check the resulting squares and trim them if necessary.
kendzis :D
kendzis :D
#29
I found this prior post really helpfull. Scroll down to Rose Marie's instructions:
http://www.quiltingboard.com/posts/list/10247.page
Here's a link to A Quilt in a Day instructions:
http://www.quiltinaday.com/RulerInst...ulerInsWEB.pdf
http://www.quiltingboard.com/posts/list/10247.page
Here's a link to A Quilt in a Day instructions:
http://www.quiltinaday.com/RulerInst...ulerInsWEB.pdf
#30
Super Member
Join Date: Mar 2008
Location: AZ and CT
Posts: 4,898
Originally Posted by Sharon M
I do like Zennia does, I always cut a little bigger then square it up. Also if you do take your tape off of your machine and clean it up, next time use blue masking tape it doesn't make the mess some tapes does. I haven't had my full cup of coffee yet this morning :wink: but why do you need to take your seam guide off? You aren't using it for this project, just ignore it, or did you build the tape thickness up to high?
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
4
04-05-2011 03:05 PM