Go Back  Quiltingboard Forums > Main
???? for Hand Quilters >

???? for Hand Quilters

???? for Hand Quilters

Thread Tools
 
Old 09-22-2011, 11:13 AM
  #11  
Senior Member
Thread Starter
 
Join Date: May 2010
Location: Stanley NC
Posts: 981
Default

Originally Posted by purrfectquilts
Yes, you can most definitely use templates or stencils for designs. I keep a book of designs for reference and have a standard set of stencils in the common sizes.

Check your library for a book called Amish Quilt Designs (full size) by Gwen Marston and Joe Cunningham. This is a good basic reference to keep on your shelf. You can use a copy machine to make the designs larger or smaller.

Start with a sz 7 between needle and practice until your stitches are even then move up to a sz 9 or sz 11. Knot your thread on the end you cut from the spool and never use a piece longer than 16 or 18 inches at a time. Use bees wax on your thread or use a coated quilting thread. Use a slightly thicker weight thread than you would in a sewing machine.
Thanks for your suggestions. I think I'm using a 9 or 10 (not sure) and it seems to be working fine when I'm not going over the bulky seams. I think I'll use a template when I get ready to quilt the borders.
teddysmom is offline  
Old 09-22-2011, 11:25 AM
  #12  
Senior Member
 
CarrieC's Avatar
 
Join Date: Sep 2011
Location: Virginia
Posts: 811
Default

My only hint is I use a "warm up" piece. So at night, when I curl up to hand quilt for a bit, I start by stitching on a "warm up" piece. Once my fingers and hands get into a rhythm I switch over to my project.

I make a "warm up" piece from leftover quilt squares etc. that will eventually become potholders, or mug rugs etc. Things that don't require the finest stitching I can produce!

Good luck! Sounds like you're going great so far!!!
CarrieC is offline  
Old 09-22-2011, 11:26 AM
  #13  
Super Member
 
Join Date: Aug 2010
Location: Houston, TX
Posts: 3,955
Default

Originally Posted by CarrieC
My only hint is I use a "warm up" piece. So at night, when I curl up to hand quilt for a bit, I start by stitching on a "warm up" piece. Once my fingers and hands get into a rhythm I switch over to my project.

I make a "warm up" piece from leftover quilt squares etc. that will eventually become potholders, or mug rugs etc. Things that don't require the finest stitching I can produce!

Good luck! Sounds like you're going great so far!!!
What a really handy tip - thanks for sharing
butterflies5518 is offline  
Old 09-22-2011, 11:31 AM
  #14  
Super Member
 
sweetpea's Avatar
 
Join Date: Jul 2010
Location: southeast Kansas
Posts: 1,086
Default

just keep at it. it will get better with time. Good luck and enjoy your time at the frame.
sweetpea is offline  
Old 09-22-2011, 11:48 AM
  #15  
Super Member
 
Join Date: Mar 2011
Location: Central NJ
Posts: 5,570
Default

I use stencils all the time. They are wonderful. For the most part I've gotten away from SID quilting for this very reason. Also another reason I press my seams open. I try to find stencils that are complimentary to the quilt, either flowing or boxy - you get the idea. Now my latest quilt was a table topper, carpenter's star/wheel and the fabrics were very bold. I just wanted the quilt pattern to speak so I only did SID. Painful but what I wanted for that piece.
NJ Quilter is offline  
Old 09-22-2011, 11:49 AM
  #16  
Senior Member
Thread Starter
 
Join Date: May 2010
Location: Stanley NC
Posts: 981
Default

Originally Posted by NJ Quilter
I use stencils all the time. They are wonderful. For the most part I've gotten away from SID quilting for this very reason. Also another reason I press my seams open. I try to find stencils that are complimentary to the quilt, either flowing or boxy - you get the idea. Now my latest quilt was a table topper, carpenter's star/wheel and the fabrics were very bold. I just wanted the quilt pattern to speak so I only did SID. Painful but what I wanted for that piece.
All advice I've ever gotten is NEVER press seams open because it weakens the seam when hand pieced. Do you have any problems with that?
teddysmom is offline  
Old 09-22-2011, 12:17 PM
  #17  
Super Member
 
117becca's Avatar
 
Join Date: Oct 2010
Location: dayton OH
Posts: 1,911
Default

i will also try to avoid seams. Sometimes I will run the needle under the top layer to the other side of the seam and start stitching again.
117becca is offline  
Old 09-22-2011, 12:31 PM
  #18  
Senior Member
 
Hinterland's Avatar
 
Join Date: Oct 2009
Location: Hudson Valley, NY
Posts: 941
Default

Originally Posted by teddysmom
All advice I've ever gotten is NEVER press seams open because it weakens the seam when hand pieced. Do you have any problems with that?
I wouldn't press a hand pieced seam open, but that's me. I pressed machine pieced seams open on my latest project, which I hope to be hand quilting soon. I'm hoping it all works out okay.

Janet
Hinterland is offline  
Old 09-22-2011, 06:34 PM
  #19  
Super Member
 
Join Date: Mar 2011
Location: Central NJ
Posts: 5,570
Default

Originally Posted by teddysmom
Originally Posted by NJ Quilter
I use stencils all the time. They are wonderful. For the most part I've gotten away from SID quilting for this very reason. Also another reason I press my seams open. I try to find stencils that are complimentary to the quilt, either flowing or boxy - you get the idea. Now my latest quilt was a table topper, carpenter's star/wheel and the fabrics were very bold. I just wanted the quilt pattern to speak so I only did SID. Painful but what I wanted for that piece.
All advice I've ever gotten is NEVER press seams open because it weakens the seam when hand pieced. Do you have any problems with that?
I typically machine piece my quilts. I've never had an issue with the seams being pressed open. Neither with weak seams or with batting coming through. Hand piecing may present other issues. I've only hand pieced one quilt - a tumbling block and did english paper piecing with it so the seams were done to the side on that one.
NJ Quilter is offline  
Old 09-22-2011, 06:41 PM
  #20  
Power Poster
 
sewbizgirl's Avatar
 
Join Date: Oct 2010
Location: Mississippi
Posts: 25,992
Default

Originally Posted by teddysmom
I'm a newbie who hand quilts. I'm quilting a 9 patch and am quilting around each patch. I'm still trying to get my stitches smaller and even but have a problem when I'm stitching over the seam allowance that has been pressed to one side. Have you ever used templates or stencils for your design? This would mean less stitching over the bulky edges?
I think this is why "echo quilting" was devised... to stay away from the bulky seams and just echo them, maybe 1/4" or 1/2" away.
sewbizgirl is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
teddysmom
Main
7
05-23-2011 07:41 PM
just_the_scraps_m'am
Main
0
06-24-2010 08:00 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter