Help me get the wonk out of this fabric
#21
For the fractured flowers technique, it is not so critical that they are exactly the same, as for OBW. And, you don't have to cut the squares on the grain ... you're using the gridded fusible for this? That will keep things straight for you!
But I'd still try to block them to get them behaving as best you can.
But I'd still try to block them to get them behaving as best you can.
#22
Super Member
Join Date: Sep 2010
Location: Williamsport, PA
Posts: 1,082
start in the center---line up the designs---pinning them together so the match perfectly- then smooth the fabric out from them--your outter edges will have to be re-straightened-but your motifs should be lined up- problem with using panals is they are seldom printed exactly alike- and once fabrics have been pre-washed the wonky-ness really becomes apparent- in some cases it is better to forgo the prewashing part---but too late now- the only thing to do is line up the designs---but it may still be impossible-they may not even be the same size anymore- putting them together and pinning them will show you if their size is off too.
good luck.
good luck.
#23
Senior Member
Join Date: May 2010
Location: in the sheepshed
Posts: 368
The block you describe is possibly called *FourPatch Posey* (google that). The technique for OBW and stack and whack and poseys regarding pinmatching the layers of fabric is pretty much the same... and you do NOT wash the fabric first.. its a BIGGIE... not washing it.. as it distorts the prints and you cant pinmatch them. You could try the suggestions on trying to reshape your fabric with steam and whatever.. but if it was me i would use the panels for something else... and get four layers of new fabric...... hard as that sounds.
#24
Senior Member
Join Date: May 2010
Location: in the sheepshed
Posts: 368
When i google fractured flower, i see that someone did publish a variation of using a fourpatch in stack and whack technique, i.e. the difference being in poseys all the same corners go towards the middle, in the fractured-flowers they are all kept vertical in their same orientation... Interesting.
But... still... the washing and ironing may have changed your fabric enuf that you could think of using it for something else, and trying again on the fabric choice....
But... still... the washing and ironing may have changed your fabric enuf that you could think of using it for something else, and trying again on the fabric choice....
#25
Member
Join Date: Jan 2011
Location: Yuba City, CA
Posts: 3
The only way I have been able to get the "wonk" out is to wet the piece(s) and pin them to something flat and then let them dry. Joann's has a corrugated board that folds up for dressmakers but works for this because it has a grid on it and you can place a panel on it and stick pins in it to line up the design. I usually don't wet the fabric with water, I use fabric finish (like spray starch but not as stiff). Line up and pin the first panel in a few places then repeat with the additional panels. I have been known to take a blow dryer to it to be able to get on with my project!
Thread
Thread Starter
Forum
Replies
Last Post
mpeters1200
Main
21
09-09-2008 06:44 AM