Help with Metalic Thread
#1
Help with Metalic Thread
I am trying to do some thread painting with metalic thread and the thread keeps breaking, and the thread seems to be pushed down into the fabric. I am sure I have tension issues, but up or down? Also, I saw a post at one time that a lady was telling the needle size/type to use and what worked best for the bobbin thread. Please, I need help!!! I don't have a lot of patience for playing. Or rethreading!! Thinking about doing it by hand, it is that frustrating to me!!!!
#2
I recently saw a Fons and Porter show, and a man, Eric something, was talking about thread. He mentioned metallic thread and said that since it was a flat thread that you had to have the spool standing up, not parallel to the machine. How is your thread positioned? If it's laying down, it might help to bring the spool up. Hth, Gina
#3
Super Member
Join Date: Dec 2010
Location: Norfolk, VA
Posts: 5,397
Spool of thread should be standing up; I put mine in a coffee cup and up and over the machine. Make sure it doesn't get close to the take up wheel or it could get tangled. You can also use Microtec needles too those will help. Go to emblibrary.com to see their videos. I'd try like a size 90 needle,
#4
Ive also been using metallic thread to decorate some bug jars for my daughters quilt. I have put a thin layer of fleece batting on the back side of the jars for 3D effect But I think it is also working somewhat as a stabalizer for all the thread work and quilting since I havent yet pieced them together or sandwhiched it yet I started using a 90/14 heavy duty needle it worked great, Im using the spool up and down, supreme slider and I believe my feed dogs are still up because the slider covers them and I think when you lower them you start to have more issues with your machine make sure the thread isnt getting caught on something along the path I keep my spools on a stand slightly to the side/back of my machine I hope I could help.
#5
I also just read that metallica or metafil needles have a nonstick coating in the eye to reduce friction with metallic threads, but topstitch needles are great also because they have an eye that is flatter across the top helps to prevent fraying and keeps glitzy threads from curling and breaking - Libby Lehman.
#6
Thank you for all the quick responses. I did have the thread laying paralell, but stood it up. My Janome has a spot for that, but maybe I will try my self standing thread holder. I am also going to go get some different needles. I knew I had seen something about metalic threads.. Now I remember, I have the show taped witht he guy using the metalic threads!! I will pop that up and watch it tonight!! Thank goodness for the DirecTV recording system!!
#7
I recently saw a Fons and Porter show, and a man, Eric something, was talking about thread. He mentioned metallic thread and said that since it was a flat thread that you had to have the spool standing up, not parallel to the machine. How is your thread positioned? If it's laying down, it might help to bring the spool up. Hth, Gina
BTW Metallic needles and topstitch needles are pretty much identical. Long eye is the important part
#8
I use metallic threads in an upright position; Metallic, Metafil, or Metallica needles size 90/14 (they all have a longer, smoother eye, but I prefer Schmetz); tension at 2 or 3; and stitch length at 2.5 to 3. Metallic needles are smoother than topstitch needles, thus reducing the chances of breaking even further. Once I settled on these settings, they have worked for me perfectly ever since.
#9
The only thing I would add to the explanation is a thread stand behind the machine!!!
I use metallic threads in an upright position; Metallic, Metafil, or Metallica needles size 90/14 (they all have a longer, smoother eye, but I prefer Schmetz); tension at 2 or 3; and stitch length at 2.5 to 3. Metallic needles are smoother than topstitch needles, thus reducing the chances of breaking even further. Once I settled on these settings, they have worked for me perfectly ever since.
#10
Power Poster
Join Date: Jun 2011
Location: Southern California
Posts: 19,127
I recently saw a Fons and Porter show, and a man, Eric something, was talking about thread. He mentioned metallic thread and said that since it was a flat thread that you had to have the spool standing up, not parallel to the machine. How is your thread positioned? If it's laying down, it might help to bring the spool up. Hth, Gina
Thread
Thread Starter
Forum
Replies
Last Post
Cheriefaye2008
Main
27
08-12-2010 06:20 PM