Grandmother's Flower Garden Binding problem/question???
#1
Super Member
Thread Starter
Join Date: May 2010
Location: Southeast Idaho
Posts: 3,210
Grandmother's Flower Garden Binding problem/question???
Hi everyone! I need help and advice. A friend sent me this beautifully HAND-PIECED GFG top 3 years ago. I have finally finished hand quilting it and am now ready for the binding but....two sides are straight and I have no problem with that but two sides are hexi edges and I am at a loss at how to get binding on them. See attached picture. I am thinking I will need to do a bias binding for the two pointy edges. I have never done this before. Is it hard and do you think the fabric cut on bias will stretch enough to fit the peaks and valleys? Will I have to make tucks like I do when going around a corner on a regular quilt. I have put so much time into this not to mention the time friend put in on hand piecing this whole thing that I don't want to mess up at the end. I had thought of just making a straight edge all around but that seems to be the chicken way out. Open for any and all suggestions.
#2
Member
Join Date: Aug 2010
Location: Pawcatucck, CT
Posts: 80
What a job done so far by both of you, I know b ecause I have had one in the works for years. I only work on it occassionaly. I have a vintage one made by my grandmother in the early '40's and she just turned in 1/4" on the top and the back and slipstitched it together hexes all around. I am just wondering how you got a stright edge on two sides?
#3
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,558
Yes to the bias binding, and you will need to do ALL sides in bias. Remember to not pull on the binding as you're sewing, otherwise you'll get puckers.
Here are some tutes that should help.
http://ankastreasures.wordpress.com/...t-binding-tip/
http://ankastreasures.wordpress.com/...e-your-skills/
http://ankastreasures.wordpress.com/...ng-odd-angles/
Or, you could just cut the other 2 edges straight and bind them all with straight binding.
Here are some tutes that should help.
http://ankastreasures.wordpress.com/...t-binding-tip/
http://ankastreasures.wordpress.com/...e-your-skills/
http://ankastreasures.wordpress.com/...ng-odd-angles/
Or, you could just cut the other 2 edges straight and bind them all with straight binding.
#5
Super Member
Join Date: Aug 2011
Location: Asheville, previously Lake Vermilion, Tarpon Springs, Duluth, St Paul, Soudan
Posts: 1,651
Here's a video on how to finish the quilt with a facing if you prefer that method
http://m.youtube.com/#/watch?v=lwPe_...%3DlwPe_84GBfY
http://m.youtube.com/#/watch?v=lwPe_...%3DlwPe_84GBfY
#6
Super Member
Thread Starter
Join Date: May 2010
Location: Southeast Idaho
Posts: 3,210
What a job done so far by both of you, I know b ecause I have had one in the works for years. I only work on it occassionaly. I have a vintage one made by my grandmother in the early '40's and she just turned in 1/4" on the top and the back and slipstitched it together hexes all around. I am just wondering how you got a straight edge on two sides?
#7
Super Member
Thread Starter
Join Date: May 2010
Location: Southeast Idaho
Posts: 3,210
Pegg and others...thanks so much for all the tips. I checked out the facing one and although I might use it someday for another quilt, I really think this one 'needs' the binding edge for contrast. It was great seeing that little snip and knowing that makes all the difference. Now I just have to practice cutting bias binding strips on a scrap piece of fabric first before I get into the real thing. Thanks everyone!
#8
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,558
The cutting part is easy. It's the sewing part that will require patience! If you've never done anything but straight binding, I strongly encourage making a small practice quilt using scraps, same size hexies, and practicing on it before you start on the real quilt.
#9
Super Member
Thread Starter
Join Date: May 2010
Location: Southeast Idaho
Posts: 3,210
Dear friends,
Just an update! On July 27th at 9p.m., I finished the last stitch of getting the binding on. Then rushed it down to the quilt display section (not the ones for judging) of our fair where it now is. When I pick it up on Sat., I will sew on the label and as per agreement with gal who hand-pieced the top, it will go off to be offered for sale. Just wanted to share pics and say thanks for all the help of getting the zig-zag bias binding on. Also, wanted to correct my first post and say that I received the top etc. Feb. 2011 and so has taken only a little over 2 years for me to get it all hand quilted.
Just an update! On July 27th at 9p.m., I finished the last stitch of getting the binding on. Then rushed it down to the quilt display section (not the ones for judging) of our fair where it now is. When I pick it up on Sat., I will sew on the label and as per agreement with gal who hand-pieced the top, it will go off to be offered for sale. Just wanted to share pics and say thanks for all the help of getting the zig-zag bias binding on. Also, wanted to correct my first post and say that I received the top etc. Feb. 2011 and so has taken only a little over 2 years for me to get it all hand quilted.
Thread
Thread Starter
Forum
Replies
Last Post