Minky rag quilt
#1
Member
Thread Starter
Join Date: Nov 2012
Posts: 9
Minky rag quilt
I have some beautiful Minky fabric to make a rag quilt for my daughter-law. This is my first attempt to use Minky fabric. I am going to use 12" squares four across and 8 up so it will be a small throw. Should I skip batting? I plan to use fabric spray to held the pieces together when I sew the X. Any suggestions?
#2
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
Minkie doesn't fray like fabrics used for raggy quilts, the edges will be kind of rough, you might want to just make a patchwork quilt, with your edges enclosed. As for the batting its a personal choice-- some people do use a batting, others choose not to.
#4
Member
Thread Starter
Join Date: Nov 2012
Posts: 9
I realize that Minky will not "rag" but it will curl. I saw a breast cancer patient with one in a treatment room and really liked the look. Will 12" squares be too large to work with? Any hints for keeping the fabric from slinking while I am sewing?
#7
Super Member
Join Date: Aug 2010
Location: Slidell, Louisiana
Posts: 6,951
I did a baby rag quilt using minkee for one side, flannel for the other, no batting. I used the pre-cut 5" minkee squares, so didn't need to sew an X, but it came out really cute. If I were going to use larger squares, I would probly do as others suggested, use spray basting or elmers to hold together, and a walking foot. At the time I made mine, I didn't even have or know what a walking foot was, have one now with my newer machine though!
#9
Senior Member
Join Date: Feb 2014
Posts: 453
Minky wont work for a "Rag" quilt. You will not get the "Rag", with Minky. I doesn't fray like cotton. I've used Minky in "Scrap" quilts and on the back of quilts. And Minky makes a great throw sized quilts, just not a rag quilt. Sorry
#10
Are you only using Minky? I use it all the item for rag quilts while it does not rag it curls and is still cute. Most the time I use one layer Minky and two layers of flannel. You need a wider seam about half inch from the edge and you need to use a ball or stretch needle. I have good luck using 9 in squares without spray basting. If both top and backing are minky use one layer of flannel in the middle it will hold them together and minimize the slide while you sew. I do each square with an X in the middle to stabilize them. Also lengthen your stitch to about 4 to 4.5 in length.
Thread
Thread Starter
Forum
Replies
Last Post
DonnaPBradshaw
Main
6
02-09-2016 07:33 PM