Go Back  Quiltingboard Forums > Main
OK, Crescendo owners - I have a stupid question... >

OK, Crescendo owners - I have a stupid question...

OK, Crescendo owners - I have a stupid question...

Old 11-02-2014, 05:18 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Jan 2014
Location: Laguna Hills, CA
Posts: 261
Default OK, Crescendo owners - I have a stupid question...

I finally picked up my Crescendo yesterday. Yeah!!!! Before this my machine was a Pfaff Hobbymatic 955 which I have owned for 22 years. My Pfaff was a tank and still is. It has never broke down and to this day still sews beautifully and I will never get rid of it. The Crescendo is a whole new world to me. I have never used a computerized sewing machine before so as excited as I am, I am also a little nervous and don't want break anything.

Ok, here is my question: When you unthread your machine do you do it by grabbing the spool and yanking the thread out that way or do you cut the thread at the spool and then pull it out from the needle end? With my Pfaff I just grabbed the spool and pulled it out that way. I have searched through the Crescendo manual and saw no mention of it. When I was at the dealer yesterday, I didn't think of it. I just don't want to do something that will mess up the tension settings of my new machine.

Thanks in advance!
D.
Stevensgirl is offline  
Old 11-02-2014, 05:27 AM
  #2  
Senior Member
 
Join Date: Aug 2011
Posts: 449
Default

I have the babylock Ellisimo and my dealer and all instructors have emphasized always cutting at the spool and pull thread from the needle, in this way thread is not going backwards through the tension etc. I was always told this also with my Vikings. I don't know about the Crescendo for sure but I think they like the Ellisimo have an inspirational guide available in notebook form which is an excellent source for looking up anything about the machine and teaching yourself one function by simply removing that page from the notebook and follow it step by step at your machine. I was lucky enough to receive this in my ellisomo package but I am sure they are available for purchase from your dealer or BL website. I hope this helps
Nantie is offline  
Old 11-02-2014, 05:33 AM
  #3  
Super Member
 
Join Date: Mar 2011
Location: Central NJ
Posts: 5,433
Default

Interesting....didn't know that about Vikings. Have been pulling out backwards for the 10+ years I've owned it and never had a tension - or any other - issue at all. It has auto tension and never a problem.
NJ Quilter is offline  
Old 11-02-2014, 05:36 AM
  #4  
Super Member
 
Mitch's mom's Avatar
 
Join Date: Jan 2011
Location: TN
Posts: 1,443
Default

I am mostly in the habit of cutting at the spool but, like all things we start out doing a different way, I back slide every now and again. The one time I never grab the spool is if I have a thread break. I don't want the frayed end going back through the tensions .
Mitch's mom is offline  
Old 11-02-2014, 06:46 AM
  #5  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 38,468
Default

The tension is only engaged when the foot is down so either ways would work if the foot is up. I usually cut at the spool and pull the thread down as I think it flosses lint out of my discs.
Tartan is offline  
Old 11-02-2014, 06:47 AM
  #6  
Super Member
 
Join Date: Jan 2012
Posts: 4,782
Default

I have a Babylock Serenade and I've been a backwards thread puller all my life with no problems (knock on forehead) on any machines, including this one.
JustAbitCrazy is offline  
Old 11-02-2014, 08:17 AM
  #7  
Super Member
 
Join Date: Feb 2013
Posts: 1,340
Default

I just pull it out backward. I didn't know there was another way to do it!
michelleoc is offline  
Old 11-03-2014, 04:57 AM
  #8  
Super Member
 
Join Date: Feb 2011
Location: New Rockford, ND
Posts: 1,945
Default

i was always taught to cut thread and pull out by the needle.
Joset is offline  
Old 11-03-2014, 05:51 AM
  #9  
Senior Member
 
Judi in Ohio's Avatar
 
Join Date: Sep 2008
Location: Ohio
Posts: 673
Default

I have the Crescendo and it is a great machine. I embroider with my machines so was always taught to pull forward, never back because it causes lint to get into the innards because of the way thread is wound. I have had a few machines so the Crescendo was not a huge leap - this must be a creature from another world if it is your first computerized sewing machine. I like this machine for so many reason, but one biggy is, I had an Ellisimo and a V Diamond, and the motor would be shut down if it got strained in an instant. All kinds of error messages - really wimpy sewing power. This machine does not do that. I sew double quilted purses so I am putting thru many, many layers of cloth, sewing seams and then french seaming, then adding pockets and handles. I could never do a purse with the afore mentioned machines, but I did fine with my Crescendo - of course I did get smart and beat the hell out of my joined seams - helped so much - couldn't believe it.
Enjoy your new baby.
Judi in Ohio is offline  
Old 11-03-2014, 05:57 AM
  #10  
Super Member
 
#1piecemaker's Avatar
 
Join Date: Oct 2007
Location: Ashdown, AR
Posts: 9,236
Default

I guess I never knew the difference. Mama always said, waste not, want not so any little bit of thread saved by pulling from the top was that much saved.
#1piecemaker is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tippysmom
Main
24
10-30-2018 12:43 AM
sculpyfan
General Chit-Chat (non-quilting talk)
50
10-14-2011 03:20 PM
Pam H
General Chit-Chat (non-quilting talk)
13
10-06-2011 02:16 PM
Renee110
Main
60
01-31-2011 07:52 AM
Jim's Gem
General Chit-Chat (non-quilting talk)
51
06-06-2010 06:15 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter


SEO by vBSEO ©2011, Crawlability, Inc.