Pass On The Best Idea You've Had While Quilting
02-26-2011, 07:13 PM
#171
Super Member
Join Date: Aug 2010
Location: Australia
Posts: 4,116
Originally Posted by dhanke
I don't have a light box for tracing patterns etc., but I do have a plexiglass extension table on legs that came with my machine. I flip my ott-lite on it's back and slide it under the extension table, works perfectly.
My second tip is about rotary cutting multiple strips from a single piece of fabric. For example, if I need six strips 2" wide, I first cut a 12" strip with my square ruler, then I slide it over to the 10" mark, cut again, slide it to 8", cut again and so on until I have all 6 strips. It's alot faster and more accurate. If I'm working with a strip width that's not so easy to mentally calculate, such as 1 3/4 inches, I use a calculator to determine the maximum width I can use for the first cut, in the case of a 12 inch ruler it would 10.5 inches. Then I use the calulator to subtract 1 3/4 inches for the second cut and move the ruler to the 8 3/4 inch mark. I continue to use the calculator for each cut because I don't trust myself to figure it correctly in my pea brain!
Probably sounds complicated, but it really saves time when cutting lots of strips.
My second tip is about rotary cutting multiple strips from a single piece of fabric. For example, if I need six strips 2" wide, I first cut a 12" strip with my square ruler, then I slide it over to the 10" mark, cut again, slide it to 8", cut again and so on until I have all 6 strips. It's alot faster and more accurate. If I'm working with a strip width that's not so easy to mentally calculate, such as 1 3/4 inches, I use a calculator to determine the maximum width I can use for the first cut, in the case of a 12 inch ruler it would 10.5 inches. Then I use the calulator to subtract 1 3/4 inches for the second cut and move the ruler to the 8 3/4 inch mark. I continue to use the calculator for each cut because I don't trust myself to figure it correctly in my pea brain!
Probably sounds complicated, but it really saves time when cutting lots of strips.
02-26-2011, 07:21 PM
#172
Super Member
Join Date: May 2010
Location: Somewhere neat!
Posts: 1,146
Originally Posted by sewTinker
It's not my idea (simply quilt guest, from 10 - 12 years ago); BUT,
rubberband two sharpened pencils together and use for tracing applique or other patterns. You will be drawing the cutting line, And the 1/4" seam allowance. Pretty cool...
rubberband two sharpened pencils together and use for tracing applique or other patterns. You will be drawing the cutting line, And the 1/4" seam allowance. Pretty cool...
Marysewfun
02-26-2011, 07:23 PM
#173
Super Member
Join Date: Aug 2010
Location: Australia
Posts: 4,116
I use the empty CD or DVD containers (the large ones with the spindle) to put balls of tape,binding,lace etc onto. The lid keeps everything clean and stackable. Sometimes I cut a hole in the lid - on the side or top- to thread the 'string' through.
02-26-2011, 07:25 PM
#175
Super Member
Join Date: May 2010
Location: Somewhere neat!
Posts: 1,146
Originally Posted by mhansen6
This idea I tell everyone because it works so well. Go to Harbor Freight and buy a glass pane suction cup handle. Less than $6. Put it on your ruler as a handle. Your ruler will not slip around because you have a better grip on it and it keeps your fingers away from the edge of the ruler so they won't get sliced. Yes I learned that lesson from experience.
Marysewfun. :lol:
02-26-2011, 07:32 PM
#176
Super Member
Join Date: Apr 2010
Location: Galveston Texas
Posts: 1,596
I bought the ring for my rulers but hated it because I had to ake off the ones in front to get to the one that I wanted. So I found the binder clips, I put them thru the hole in the ruler and put it on the ring. Now all I half to do is open the binder ring.
Also Harbor Freight is a wonderful source not only for blades but I have bought clips, and plan to buy a table that
will be perfect for a ironing table. They also have the gloves with the rubber fingers, and everything is much cheaper than items with quilt in the name.
Also Harbor Freight is a wonderful source not only for blades but I have bought clips, and plan to buy a table that
will be perfect for a ironing table. They also have the gloves with the rubber fingers, and everything is much cheaper than items with quilt in the name.
02-26-2011, 07:41 PM
#177
Senior Member
Join Date: Mar 2010
Location: Tennessee
Posts: 467
Originally Posted by Carron
I glued a narrow magnetic strip across the top front of my sewing machine. Then when I am sewing something that has the straight pins and as they approach the needle, I pull them out and stick them onto the magnetic strip. Nothing falling onto the floor or worse into the lap.
02-26-2011, 07:43 PM
#178
Super Member
Join Date: Nov 2010
Location: southeast iowa
Posts: 2,887
I was experimenting with glue stick and applique....making a total mess as I normally do needle turn. Anyway, I found if I ironed a big piece of freezer paper onto my ironing board I could change the paper as it got sticky instead of ruining my ironing board cover.
Also, I try to sew together 2 small squares between sewing -- they eventually turn into 4- or 9-patches, etc.
Thanks for all of the great tips.
Also, I try to sew together 2 small squares between sewing -- they eventually turn into 4- or 9-patches, etc.
Thanks for all of the great tips.
02-26-2011, 07:44 PM
#179
Senior Member
Join Date: Aug 2010
Location: No. Calif
Posts: 527
Originally Posted by Carron
I glued a narrow magnetic strip across the top front of my sewing machine. Then when I am sewing something that has the straight pins and as they approach the needle, I pull them out and stick them onto the magnetic strip. Nothing falling onto the floor or worse into the lap.
02-26-2011, 07:45 PM
#180
Super Member
Join Date: May 2010
Location: Somewhere neat!
Posts: 1,146
[quote=galvestonangel]Also Harbor Freight is a wonderful source not only for blades but I have bought clips, and plan to buy a table that will be perfect for a ironing table. quote]
Hmmm - is it rectangle or how is it shaped? Thanks.
Marysewfun
Hmmm - is it rectangle or how is it shaped? Thanks.
Marysewfun
Thread
Thread Starter
Forum
Replies
Last Post
EllieGirl
General Chit-Chat (non-quilting talk)
12
10-24-2013 04:45 PM
AngelinaMaria
Main
10
03-11-2012 11:57 AM
ChildoftheUniverse
General Chit-Chat (non-quilting talk)
12
11-22-2011 05:04 PM
DonnaB
General Chit-Chat (non-quilting talk)
22
09-14-2011 06:17 PM
