Pin embedded in stippling! Now what?
#1
I have just finished stippling the pieced section of a lap quilt for my sister. As I was folding it for the evening, I found I had somehow embedded a straight pin with a big head between the backing and the batting. I will not unsew 7 hours of work! Do any of you have any ideas what I can do now?
As long as I am on this site, I have one more question. I made a folded half inch border between the outside border and the inner border. How do I deal with it? I didn't plan on stippling when I stitched the folded border in place. Should I stipple it down, leave it loose (making it the only thing not stippled), or what?
As long as I am on this site, I have one more question. I made a folded half inch border between the outside border and the inner border. How do I deal with it? I didn't plan on stippling when I stitched the folded border in place. Should I stipple it down, leave it loose (making it the only thing not stippled), or what?
#4
It takes some doing, but here's what I did.
Locate the buried head and using another straight pin, directly over the offending pinhead, separate the "threads
until you can pop the pin up and out. If it is under the batting, approach from the back side. Patience is what it takes.
Locate the buried head and using another straight pin, directly over the offending pinhead, separate the "threads
until you can pop the pin up and out. If it is under the batting, approach from the back side. Patience is what it takes.
#6
Super Member
Join Date: May 2009
Location: Merced, CA
Posts: 4,188
Originally Posted by shequilts
It takes some doing, but here's what I did.
Locate the buried head and using another straight pin, directly over the offending pinhead, separate the "threads
until you can pop the pin up and out. If it is under the batting, approach from the back side. Patience is what it takes.
Locate the buried head and using another straight pin, directly over the offending pinhead, separate the "threads
until you can pop the pin up and out. If it is under the batting, approach from the back side. Patience is what it takes.
That's exactly what I was going to suggest. I do that every now and then, which is why I try to use the largest headed pins I can find.
#7
Thank you, I'll try to use the hammer with a piece of fabric. I was concerned about making a hole if I hit the big ball with a hammer, but a piece of fabric should help. I'll try it on a scrap first then let you know what happened. JUDY
#9
The hammer method left a small hole. I probably hit it too hard. So I tried the "pull the threads apart" method. It was better, but it also took some of the color away. I'll use this any way. When I went to find the first pin, I found three more! What was I doing the day I "sandwiched"? I don't drink. Could it be the 21 inches of snow that day and a free day to quilt? I tried to get too much done with my bonus day.
Thank you for the information! JUDY
Thank you for the information! JUDY
Thread
Thread Starter
Forum
Replies
Last Post
sandpat
Pictures
54
09-30-2012 05:55 AM