Go Back  Quiltingboard Forums > Main
Pre-washing FQs >

Pre-washing FQs

Pre-washing FQs

Thread Tools
 
Old 07-07-2011, 10:13 AM
  #21  
Junior Member
Thread Starter
 
PrettyCurious's Avatar
 
Join Date: Jul 2011
Location: Mid-Michigan
Posts: 196
Default

Ok, so ya'll confirmed why I don't buy FQ's. I did get a bag of at least 20 of them in our quarterly gift exchange, and am washing them now. They are all small checked patterns in anteeky lookin green, red, and tans. I know I'm gonna enjoy using them on something!

I also trim the threads before putting them in the dryer.

I doubt I will ever buy jelly rolls or charm packs. Too messy, and expensive for my taste. I supose I'm a little bit anal about some stuff.
PrettyCurious is offline  
Old 07-08-2011, 05:13 AM
  #22  
Junior Member
 
scrapbeagle's Avatar
 
Join Date: Mar 2011
Location: South Louisiana
Posts: 255
Default

I am a pre-shrinker. Smaller pieces of fabric I usually soak in hot water for about fifteen minutes then I put it in the dryer. I have been disappointed too many times when sewing garments that haven't been pre shrunk and after the first washing just didn't fit right, etc. I would never want to spend all that time on a quilt and then have it bleed its colors.
scrapbeagle is offline  
Old 07-08-2011, 05:21 AM
  #23  
Super Member
 
lass's Avatar
 
Join Date: Apr 2007
Location: North Carolina
Posts: 1,172
Default

Ditto -prewash in a lingere bag
lass is offline  
Old 07-08-2011, 05:21 AM
  #24  
Super Member
 
LindaMRB's Avatar
 
Join Date: Jan 2011
Location: Athens, Georgia
Posts: 1,700
Default

[quote=chairjogger]

Dawn dish soap in a 6 cup glass measuring cup under the facet.. in hot water..
really does test the fabric and can see right away if it will be a problem.. some just washes out.. and clear water then is what comes after the soap is gone..

[partial quote]


I love Dawn and use it most of the time, but I think there is bleach in Dawn. I have had my dish clothes bleed forever and ever, even when I bleach them in the wash.
So Dawn might not be the best choice for washing fabric where you do not intend to bleach at all.

I use laundry detergent and mostly pre-wash. It depends on the source.
LindaMRB is offline  
Old 07-08-2011, 05:25 AM
  #25  
Banned
 
Join Date: Mar 2010
Location: Sturbridge, Ma
Posts: 3,992
Default

i prewash by hand in the sink and then iron dry. this avoids the fraying and still will shrink the fabric. I have noticed that fq's are not always cut straight so that is the reason they come out wonky. I do the best I can in cutting them but loose fabric on both ends.
Holice is offline  
Old 07-08-2011, 05:38 AM
  #26  
Junior Member
 
Join Date: Jun 2011
Posts: 294
Default

Originally Posted by PrettyCurious
Do ya do it or not?
I do, cuz I prewash everything, new or 2nd hand, but I find FQ's don't seem to come out very square. It is cuz they're cheap? or do all FQs lose their shape?
If you wash and dry them loose, rather than in a lingerie bag, they lose their shape because they are so small. The warp and weft threads are relatively short, so there isn't enough length to "anchor" the weave.

They should be easy to re-true.

First make sure they were cut along the grain to start with. Pull a thread perpendicular to the selvedge on either side and trim anything that hangs over that straight thread line. Likewise, pull a warp thread from the edge parallel to the selvedge and make sure that the fabric is also true to that line.

Press lightly to get it to lay flat, then measure the diagonals. Take the corners of the shorter diagonal and give a GENTLE pull to shift the fabric back towards true. Emphasis on the gentle!

Measure the diagonals again and, if necessary, give another gentle pull to the shorter diagonal.

It is important to be gentle because it's better to have to pull three times in the same direction than it is to pull hard, have to correct that pull, then correct again. If you see what I mean.

Washing fabric in a lingerie bag helps to protect it from getting tangled around itself or around other items in the load, then getting pulled out of shape.
MsEithne is offline  
Old 07-08-2011, 07:52 AM
  #27  
Super Member
 
Join Date: May 2009
Location: No. California
Posts: 2,131
Default

If I thini it's a bleeder, I will put in a basin with some Resveritol to set the color. Then I put in a salad spinner to get all the excess water out and hang to dry. Works well for batiks as well as reds and blues. Otherwise I generally use the lingerie bag method.
wendiq is offline  
Old 07-08-2011, 08:10 AM
  #28  
Super Member
 
reeskylr's Avatar
 
Join Date: Mar 2011
Location: Castle Rock, Washington State
Posts: 1,961
Default

I pre-wash FQ's by hand too usually. Sometimes if I have a lot of them, I'll do a small load in the washing machine. Last night I was sewing some 10 inch blocks together by threes and figured it'd be easier to prewash them once I had a group. These came from a pre-cut bundle at Wal-mart's markdown area. 25 - Ten Inch Blocks.

I did say ten inch, right? ;)

After washing, they became 9 inch blocks...
Probably by the time I square them up, they will be 8 inch blocks. lol, so buyer beware. :)
reeskylr is offline  
Old 07-08-2011, 08:18 AM
  #29  
Senior Member
 
Linda58's Avatar
 
Join Date: Jun 2010
Location: South Texas
Posts: 639
Default

Too keep fat quarters from fraying or getting wonky in the wash, I fold all edges to the inside and then fold it into a small square use a saftey pin to pin the center together, then put in a lingerie bag and wash and dry. Take out and iron. no shredded edges.
I also do this with yardage, and place pins all around the outside edge, comes out of dryer in the same shape as when you put it in washer. Just unfold and iron. No twisted fabric. The inside will be damp, so iron right away.

I just washed & dried a 5 yard piece of black fabric and it came out beautiful.
Linda58 is offline  
Old 07-08-2011, 08:36 AM
  #30  
Super Member
 
Join Date: May 2009
Location: No. California
Posts: 2,131
Default

This is very interesting.....I will try this...Thanks.

Originally Posted by Linda58
Too keep fat quarters from fraying or getting wonky in the wash, I fold all edges to the inside and then fold it into a small square use a saftey pin to pin the center together, then put in a lingerie bag and wash and dry. Take out and iron. no shredded edges.
I also do this with yardage, and place pins all around the outside edge, comes out of dryer in the same shape as when you put it in washer. Just unfold and iron. No twisted fabric. The inside will be damp, so iron right away.

I just washed & dried a 5 yard piece of black fabric and it came out beautiful.
wendiq is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bearisgray
Main
22
09-14-2012 02:26 PM
Jacqndbox
Main
19
02-22-2012 08:34 PM
mpeters1200
Main
9
05-30-2007 07:29 AM
Knot Sew
Main
8
01-07-2007 04:44 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter