|
Thank you, thank you, thank you.....just had the same problem with a featherweight I just bought and was going to attack the bobbin case. Now I will rethread it first.
|
I usually forget to change the needle and have problems not always the same after. I end up saying all sorts of not nice words to my machine and anyone who can hear. DH tells me that i should take a break. sometimes that is what I need to clear my head.
|
Thanks for the reminder....I find myself doing that too.
|
LOL..I'm not a rookie..sounds familiar to me !!
|
Yeah, I am not alone. So comforting to know that. thanks.
|
Glad to hear that I am not the only one who does that. LOL
|
I had that very problem yest. Talk about frustration. I threaded, rethreaded, chgd the needle. Checked the bobbin. Rethreaded, you get the idea.
Then I heard all of you in my brain. I took the bobbin area apart & dug out some pretty good globs of lint. Put it all back together & off I went. |
That is always the first thing you try :)
Glad you called your rep and got the problem resolved. |
Originally Posted by DogHouseMom
How many times have I read all the steps one should go through when there is a *problem* with the machine? It's been seared into my brain from reading the posts (and ahem ... contributing) again and again and again. But did I practice what we (I) preach?
There must have been a bad spot on the bobbin wind and the machine gave me a ka-chunk and rewarded me with spaghetti on the bottom. No problem, snip, remove bobbin, check, go. Two stitches and had problems again but now the symptoms are worse. Loud noises, seizing, needle refuses to move - etc. Removed the whole bobbin case, gave it a thorough cleaning, changed the needle, changed the bobbin. Still having serious problems with the machine. Basically I did everything EXCEPT that one all important step. We have a problem with the bobbin so we concentrate on the bobbin area don't we? In a state of panic that my beloved Janome was on death's bed I called the dealer and the FIRST thing she asked was ... did I re-thread the machine. Well of course not!! I'm not a "rookie", I'm an experienced sewer I knew the problem was in the bobbin area so I concentrated all my efforts on the bobbin area now didn't I? Rookie mistake number 1. Re-thread the whole machine you dope. When the machine hit a bad spot on the bobbin and 'choked' the thread jumped out of the UPPER tension discs and the machine will continue to seize no matter HOW clean and pristine that bobbin area is. Will I make this mistake again? probably :) |
WOW! never gave that a thought... thanks for the tip.
|
| All times are GMT -8. The time now is 11:34 PM. |