How do I check the wiring on my featherweight?
#1
I'd like to double check the wiring on it before handing it over to dd to learn to sew on. I have the book "The Featherweight 221 and I" and it doesn't really mention checking the wiring. Is there another book that definitely has this info or a website where I can find out?
#2
I saw this reference to checking, hope it helps.
http://www.singer-featherweight.com/...aq-wiring.html
When in doubt, have it repaired. It's not worth the risk of a fire (speaking from someone dealing with non-sewing related fire damage).
http://www.singer-featherweight.com/...aq-wiring.html
When in doubt, have it repaired. It's not worth the risk of a fire (speaking from someone dealing with non-sewing related fire damage).
#3
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
go over every inch of the cord- is it cracked? any splits in the plastic coating? frays at either end? are the plug prongs straight? tight?
it's a visual thing- if the cord is worn out it needs to be replaced- check all wires-for wear/fraying/cracking/splits
it's a visual thing- if the cord is worn out it needs to be replaced- check all wires-for wear/fraying/cracking/splits
#5
I don't think it's bad but I just want to make sure. I bought it from a shop where the guy used it as his regular machine, and they also repair machines there, so it was kept up as far as maintenance. Thanks for the links-I will check that out. I emailed the man who wrote the book I mentioned but haven't heard back yet. It's an hour to the shop so I would rather just check it because like I mentioned, I think it's probably fine.
#6
I never heard back from the person who I emailed (the one who wrote the book). Maybe he doesn't check email often or maybe is just really busy. I guess I'll wing it and hope for the best.
#7
I am glad you are making sure the wiring is in order before giving it to your DD. DH always checks and repairs all the vintage machines we buy so I am not sure what to do.
You might also want to remind her to be very careful of the little light that is attached to the machine. You can get really burned by it. I have heard of people not using that light but using an additional source to light the work area. I have had some issues because I grab the little machine through the center opening and my arm or fingers hit the light.
You might also want to remind her to be very careful of the little light that is attached to the machine. You can get really burned by it. I have heard of people not using that light but using an additional source to light the work area. I have had some issues because I grab the little machine through the center opening and my arm or fingers hit the light.
#9
Ok is there some special trick to this? The first step is to remove the part where the cord plugs in but I can't get that screw loose. I am worried that I'm going to mess up the screw head if I keep trying. Maybe I'm doing something wrong...
#10
I emailed the website linked above and it bounced. I'm beginning to think about selling this machine. If I can't use it, there's no point in keeping it. I think someone else might have a shop nearby where they could take it to be checked out and actually use the thing. :(
Thread
Thread Starter
Forum
Replies
Last Post
Stitch124
For Vintage & Antique Machine Enthusiasts
22
10-16-2012 04:56 AM
Caroline S
For Vintage & Antique Machine Enthusiasts
21
10-14-2012 08:32 PM