I could use some help here.
#1
I have a Janome 6600P, and I have the dual feed foot. I also have what I thought is a stitch in the ditch foot. It looks just like the dual feed foot, but it has the piece of metal under it that I think is supposed to ride on the seam. However, if I put it onto the seam, then the needle hits far away from the ditch. What am I not understanding? Does anyone else have a SITD foot?
#2
Power Poster
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
I have to adjust my needle position a bit. Is the needle hole in the foot large enough that you can move your needle position to the side? Also, when you SID, the stitch is supposed to go just to the side of the seam, not right in it.
#4
Super Member
Join Date: Dec 2010
Location: Chula Vista CA
Posts: 7,401
I had to buy the Stitch in the Ditch foot separate from the machine. Are you using the 1/4 inch seam foot that comes with the machine? There are 2, 1.) that is the 1/4 in. foot and 2.) the 1/4 in. foot with the Straight Stitch Plate for AcuFeed.
Here is a video
www.janomespecials.com/mc11kse/video/ditch-quilting-ditch.html
Here is a video
www.janomespecials.com/mc11kse/video/ditch-quilting-ditch.html
#7
Yup, I know that. I am quite good at it, but now I wanted to use that funky foot to see if it was easier yet. I never thought of the needle position, but I don't think that will work. I will check it out though. Do you have one of those feet?
#8
Ok, I am going to reply to myself. So I can show all of you this foot. It is exactly what I have. It is just like the dual feed foot, but it has the bar on the right, like the regular 1/4" foot, the smaller one.
#9
I think I may be having a senior moment. I just looked at the foot. It looks just like the dual feed foot, but it has the 1/4" bar like my regular 1/4" sewing foot. Now I am totally confused. No wonder it doesn't work. I think it isn't a sitd afterall. They must have sold me the wrong foot, grrrr. I asked for the sitd foot. Thanks to all of you for trying to help me. I surely am confused for sure now. Mine does not have the bar under the middle of the foot.
#10
Power Poster
Join Date: Mar 2009
Posts: 15,639
I think you got it figured out. The hole in the SID foot lines up with the guide in the foot. Sounds like you got the 1/4" foot. That is a good foot to have too. Just make sure it really gives you a perfect 1/4" seam. Mine doesn't.
Thread
Thread Starter
Forum
Replies
Last Post
wordpaintervs
General Chit-Chat (non-quilting talk)
21
10-03-2013 05:48 PM
Naturalmama
Main
9
01-18-2011 04:08 PM