Repair Bernina or buy something else?
#31
Good luck with your Bernina. I just bought an Sparrow 30 and have been pretty happy with it (my understanding is the Eversewns are designed by a Bernina designer). I also just bought a Simply Red Bernina 215, because Bernina is the only company with a flat felled seam foot, which does a great machine binding. I like the look and finish better than the binding set I bought for my Janome.
#32
Senior Member
Join Date: Jan 2013
Posts: 989
Sadly back to report that I left my 180e plugged in and turned on for 24 hours, but there was no change. There is backlight to the screen, but the machine never fully boots and none of the controls respond. Not sure what to do next as I didn't get a good feeling from my last (only) interaction with the closest Bernina dealer :-(
Michelle
Michelle
#34
Super Member
Join Date: May 2010
Location: Ontario, Canada
Posts: 1,779
I have an older 1630 that I love using and have never had a major problem with it. Unfortunately the local bernina dealer has warned me that she thinks this machine is unrepairable if I start to have problems and she is always suggesting that I buy a new one.. I am very disappointed with her approach and attutude towards older Berninas. I have been looking for another dealer but there aren't any within 200 miles. - Guess I will have to look further.
#35
Super Member
Join Date: Nov 2010
Location: Utah
Posts: 2,093
Hi Michelle,
Sadly, that means that one of the circuit boards are dead. Your 180e was one of the best machines Bernina ever made. If I compared it to the newer machines, it would be hard for me to choose to get a new machine or get the old one repaired. Technology has really advanced since your machine was made, and the new 7 Series machines have some amazing bells and whistles -- including the extra throat space. But the software on yours has great capabilities already.
Sadly, that means that one of the circuit boards are dead. Your 180e was one of the best machines Bernina ever made. If I compared it to the newer machines, it would be hard for me to choose to get a new machine or get the old one repaired. Technology has really advanced since your machine was made, and the new 7 Series machines have some amazing bells and whistles -- including the extra throat space. But the software on yours has great capabilities already.
#36
Senior Member
Join Date: Jan 2013
Posts: 989
Annette,
That confirms what we suspected. I'll just part out the feet and accessories on eBay.
I already have a machine with a larger throat - my Janome 7700 that I bought when the 180e first died, and after this experience I don't have a lot of confidence in Bernina longevity. A shame, because I did like the way this one sewed, but they are very pricey for what I've seen as questionable reliability (I worked in the computer hardware industry).
It was an outside hope on your suggestion of leaving it on for a day to see what happened. Thanks for sharing that :-)
Michelle
That confirms what we suspected. I'll just part out the feet and accessories on eBay.
I already have a machine with a larger throat - my Janome 7700 that I bought when the 180e first died, and after this experience I don't have a lot of confidence in Bernina longevity. A shame, because I did like the way this one sewed, but they are very pricey for what I've seen as questionable reliability (I worked in the computer hardware industry).
It was an outside hope on your suggestion of leaving it on for a day to see what happened. Thanks for sharing that :-)
Michelle
#37
Member
Thread Starter
Join Date: Oct 2017
Posts: 29
Hi everyone. I am the original poster on this thread and I have appreciated all the Bernina and repair discussion. My Activa went back to the shop and it IS the circuit board. They said the power board messed up the circuit board. They quoted me $200 for the repair - so not as high as I had feared. It's still in the shop, however. So I am sewing on my vintage machine - got to love a machine with NO electronic parts!
#38
Hi everyone. I am the original poster on this thread and I have appreciated all the Bernina and repair discussion. My Activa went back to the shop and it IS the circuit board. They said the power board messed up the circuit board. They quoted me $200 for the repair - so not as high as I had feared. It's still in the shop, however. So I am sewing on my vintage machine - got to love a machine with NO electronic parts!
Thread
Thread Starter
Forum
Replies
Last Post
ssorrow
Main
41
10-21-2019 05:58 PM
Butterfli19
General Chit-Chat (non-quilting talk)
18
06-18-2014 05:51 PM
Grandmother23
General Chit-Chat (non-quilting talk)
14
03-22-2011 03:43 AM