Temporary quilt sleeves
#12
I've sewn sleeves on for shows and then had to take them off to sew a different size on for other shows. It was never a problem and didn't leave marks.
They also have those clamp curtain rings, but I'd be concerned that they'd leave marks on the edge of my quilt.
Could you fold over the top edge and pin it along the length with straight pins? Just a thought.
How about putting temporary 2" vertical strips of matching fabric every 8" or so that the quilt hangs from over the rod? You could easily sew those in and take them out later.
Watson
They also have those clamp curtain rings, but I'd be concerned that they'd leave marks on the edge of my quilt.
Could you fold over the top edge and pin it along the length with straight pins? Just a thought.
How about putting temporary 2" vertical strips of matching fabric every 8" or so that the quilt hangs from over the rod? You could easily sew those in and take them out later.
Watson
Last edited by Watson; 06-02-2018 at 04:13 AM.
#13
I sewed sleeves on my bed quilts that went into our guild show, using clear monofilliament thread in the bobbin and the largest basting stitch on my sewing machine. The stitches were strong enough to support the large quilts and very very easy to remove.
#14
Super Member
Join Date: May 2017
Location: Sunny Florida
Posts: 4,431
You could use one of these items to hang the quilt. Add triangles to the top corners and insert the hanging rod.
https://www.hangitdangit.com/
There are different sizes and they adjust in width depending on size.
https://www.hangitdangit.com/
There are different sizes and they adjust in width depending on size.
#15
Senior Member
Join Date: Jul 2012
Location: San Joaquin Valley, California
Posts: 829
Our guild has a show every 2 years and for the last 10 years I have shown mine. If I have enough backing fabric I use that as a sleeve with long stitches, the sleeve can be removed or left on. The sleeve stays on and when I give it away I tell them they can take if off whenever they want. The sleeves made with muslin, I take it off and save for another quilt show.
#16
Super Member
Join Date: Aug 2015
Location: Central Texas
Posts: 1,310
I just found an alternative way for smaller quilts; take 2 squares; maybe 5" and fold on the diagonal and press; put one in each of the top corners with the fold towards the center of the quilt and stitch the two raw edges down even with the quilt corners; then put a rod under the two flaps of the corner triangles. I was thinking just before I wrote this that if it is a wider quilt you could make a tab and place it in the center or evenly spaced between the corners and put the rod through it then under the corners; you would probably have to tack the bottom of the tab down to the back of the quilt but would eliminate fabric all the way across the top of the quilt.
#17
Super Member
Join Date: Sep 2010
Location: California, USA
Posts: 1,318
What about sewing with invisible thread and basting up on the top by the binding where it won't show the sewing line and then hand stitching it on the bottom of the sleeve, so as not to catch or interfer with the front quilting. All of the weight will be on the top of the sleeve and should hold it temporarily. As soon as the show is over you can just pull the plastic thread out and unstitch your hand casted thread on the bottom.
#18
Junior Member
Thread Starter
Join Date: Apr 2016
Posts: 180
Yes, this could work. If I didn't sew the sleeve into the binding (I usually put it in the lower corner, so two sides are sewn in the binding), then they could more easily remove the hand-stitching of an added sleeve if they didn't like it. I've also considered making the sleeve but not attaching it, and simply including it with instructions if they want to hang it. (This is a patriotic quilt -large throw size-that is primarily a birthday gift for my nephew, but his family is quite patriotic, so it is for them, as well).
Thread
Thread Starter
Forum
Replies
Last Post
bbeyes
General Chit-Chat (non-quilting talk)
12
01-19-2015 11:00 PM
ButtercreamCakeArtist
Main
66
03-19-2012 08:24 AM