Threading Needles for Sewing By Hand
#44
This technique works great for me if you still can't get the needle threaded try the other side. Needle eyes have an in and an out to them.
#45
Super Member
Join Date: Apr 2012
Location: Texas
Posts: 2,369
The hole is just too small to use a threader in my opinion. Try holding the needle in front of a dark surface so you can see the hole. Do this under a really good light and trim the thread end at a angle and try to thread the needle. Good luck because those things are tiny!
If you have someone that visits or a young quilter friend, (with young eyes) have them thread the whole package of needles onto the thread coming off your quilting thread spool and knot the end. When you are ready to sew, clip off the knot and pull the first needle and thread out with a long tail. Clip the thread and knot the thread coming off the spool again. This keeps the rest of the needles threaded and ready for the next time. You can quilt for a while before running out of threaded needles again.
If you have someone that visits or a young quilter friend, (with young eyes) have them thread the whole package of needles onto the thread coming off your quilting thread spool and knot the end. When you are ready to sew, clip off the knot and pull the first needle and thread out with a long tail. Clip the thread and knot the thread coming off the spool again. This keeps the rest of the needles threaded and ready for the next time. You can quilt for a while before running out of threaded needles again.
#47
Senior Member
Join Date: Mar 2011
Location: Durham, NC
Posts: 851
I have a clover needle threader and wouldn't be without it! It is amazing how well it works.
#49
Member
Join Date: Jan 2012
Posts: 3
I've been using this method and it seems to work for me. Hope this helps.
In the book "Simply Successful Applique" by Jeanne Sullivan she states: The thread that first comes off the spool is the tip end. This is the end that should be threaded into the needle's eye. Thread is spun directionally and placed on spools in a way that is intended to minimize twist while sewing. And for threading the needle: Cut the tip end of the thread at a slant for a fresh end with a sharp point. With your left hand, pinch the thread tip end between your thumb and index finger, leaving 1/16" exposed. Pick up the needle by its shaft with your right hand, lowering the eye down onto the thread tip. If it's stubborn, try flipping the needle over to the other side (one side of every needle eye is shaped with a special groove to guide the thread straight into it). If that fails, then use your scissors to clip off a fresh end. Be certain to clip at an angle.
In the book "Simply Successful Applique" by Jeanne Sullivan she states: The thread that first comes off the spool is the tip end. This is the end that should be threaded into the needle's eye. Thread is spun directionally and placed on spools in a way that is intended to minimize twist while sewing. And for threading the needle: Cut the tip end of the thread at a slant for a fresh end with a sharp point. With your left hand, pinch the thread tip end between your thumb and index finger, leaving 1/16" exposed. Pick up the needle by its shaft with your right hand, lowering the eye down onto the thread tip. If it's stubborn, try flipping the needle over to the other side (one side of every needle eye is shaped with a special groove to guide the thread straight into it). If that fails, then use your scissors to clip off a fresh end. Be certain to clip at an angle.
#50
I use floss threaders. They work great on hand and sewing needles and are especially helpful for sergers. They are very thin plastic loops.
Here's a picture: [ATTACH=CONFIG]461027[/ATTACH] There is Dentek and Butler Gum Brands that I've found.
Here's a picture: [ATTACH=CONFIG]461027[/ATTACH] There is Dentek and Butler Gum Brands that I've found.
Thread
Thread Starter
Forum
Replies
Last Post
TeeGee
For Vintage & Antique Machine Enthusiasts
23
05-21-2012 09:03 AM