Trouble with Horrizon
#1
Senior Member
Thread Starter
Join Date: May 2010
Posts: 466
Trouble with Horrizon
I have a Janome Horrizon that has started banging or getting very loud when I want to sew fast. Has anyone else had this problem. Just want to know if this is something I can fix myself. >>
#2
Senior Member
Join Date: Mar 2011
Location: Michigan
Posts: 757
If you've tried rethreading, redoing the bobbin, and changing the needle and still have the problem, you might need to have it oiled. I had a machine that would do what you're describing, and the repairman said it was bone dry, and all it needed was an oiling. Good luck!
#4
I had a 7700 that was making a fair amount of rattling noises. Took it in for standard servicing, and found out that there were a few burrs on the bobbin carriage. The burrs were sanded down, and the machine was fine. If your machine is really making a lot of noise, I would stop sewing and take it in for servicing. You don't want to damage your machine even further by continuing to sew, hoping the problem will fix itself. If the needle is hitting anything other than fabric, the timing can be thrown off as well. General service in my area is $110, plus parts. Pricey, but worth it when you consider the value of your machine.
Thread
Thread Starter
Forum
Replies
Last Post