Twin Needle
#64
Originally Posted by MommaDorian
I found this note on a website, when searching for the use of twin needles.
Note: Twin needles are ONLY for machines with the bobbin located in the front.
Does this mean the bobbin is inserted from the front rather than the top? My machine came with a twin needle, but the bobbin in loaded on top.
Note: Twin needles are ONLY for machines with the bobbin located in the front.
Does this mean the bobbin is inserted from the front rather than the top? My machine came with a twin needle, but the bobbin in loaded on top.
#66
Originally Posted by Rene Marshall
I have the same machine you do and the twin needles do work with it just make sure you use the right foot or else you will bend the needles.
#67
Member
Join Date: Jun 2010
Posts: 88
Originally Posted by Sadiemae
I googled and I didn't see that. Two different sites said that most machines can use a twin needle if they have zig-zag capabilities and a needle plate with a horizontal hole to avoid needle breakage. So if you have a zig zag foot I think you can use the needle.
Thread
Thread Starter
Forum
Replies
Last Post
dollycaswell
Tutorials
82
03-24-2013 08:29 AM