Go Back  Quiltingboard Forums >
  • Main
  • Washing quilt top before quilting? >
  • Washing quilt top before quilting?

  • Washing quilt top before quilting?

    Thread Tools
     
    Old 08-16-2010, 02:47 PM
      #11  
    Super Member
     
    Join Date: Jan 2008
    Location: currently central new jersey
    Posts: 8,623
    Default

    did you originally wash the fabric with some kind of color catcher? i use retayne. but others here have used household color catchers or color grabbers. even after quilting, i have used retayne where i thought/knew there would be a problem. i just wouldn't wash it without first sandwiching. can you baste thoroughly to a sheet, with either pins or thread, and then zig-zag the edges? the back side needs to be well-protected.

    washing gently in cool or tepid water was good advice, too.
    butterflywing is offline  
    Old 08-16-2010, 02:53 PM
      #12  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    I would absolutely not wash it in the machine. It's not just the edges that can ravel; every seam can lose threads and create a tangled mess.

    What I would do is machine baste it to a muslin foundation and then hand wash.

    Edit: Scrolled down and read your second post. You could hand wash as described above in Synthrapol, being sure to use lots of water in the sink and replacing the water frequently if you can see dye in the water. Synthrapol should keep the dye from settling into other fabrics.

    What kind of batting do you have? Polyester batting will not shrink. If it's cotton, cotton/poly, or wool the package will tell you if you can prewash. Poly doesn't need prewashing, of course. Cotton batting that is bonded and/or needlepunched can be soaked (as in a washing machine with *no* agitation), spun out, and then dried in a dryer to shrink. Traditional cotton batting cannot be prewashed; it will fall apart in the water.

    Lay the whole top out flat to dry, then take off the basted foundation and block to size.
    Prism99 is offline  
    Old 08-16-2010, 03:12 PM
      #13  
    Super Member
     
    Join Date: Jan 2008
    Location: currently central new jersey
    Posts: 8,623
    Default

    if this is strictly for a wallhanging, i wouldn't wash the batting at all. i would wash the quilt top as described by the two methods above and never wash it again.
    shake the dust loose, vacuum, air it out in the dryer or dry clean, but if you ever wash it again, it will crinkle to some degree unless the batting is 100% poly.

    prism, what do you think?
    butterflywing is offline  
    Old 08-16-2010, 03:53 PM
      #14  
    Senior Member
     
    Hinterland's Avatar
     
    Join Date: Oct 2009
    Location: Hudson Valley, NY
    Posts: 939
    Default

    Originally Posted by Rachelcb80
    So that takes blocking the quilt out of the scenario. There is some water soluble fusible in some of the applique though so I have to get it completely wet.:P
    Actually, this doesn't take blocking out of the scenario - it makes it ideal.

    I routinely wash my quilts in the washer, put them in the dryer for less than 5 minutes, then block them. Wet fabric is easily manipulated into position, which makes it way easier to block. If you're concerned about bleeding make sure you use a color catcher in the washer, and take the quilt out right away - don't let it sit there. Once you've blocked it and pinned it into position, use a fan to help the quilt dry quicker.

    Your quilt will be flat and square. FYI: this is how many quilters prepare their quilts for quilt shows. It really does help make the quilt hang better, plus it helps the batting poof up a bit without crinkling.
    Hinterland is offline  
    Old 08-16-2010, 04:03 PM
      #15  
    Power Poster
     
    Jingle's Avatar
     
    Join Date: Dec 2009
    Location: Outside St. Louis
    Posts: 38,224
    Default

    I always wash and dry all quilts and comforters as soon as the binding is sewn on and of course quilted.
    Jingle is offline  
    Old 08-16-2010, 04:11 PM
      #16  
    Super Member
     
    raptureready's Avatar
     
    Join Date: Feb 2010
    Location: Illinois
    Posts: 5,142
    Default

    Don't prewash your batting, just put it in the dryer for about 15-30 minutes. And use poly batting---less scrunchy look after washing.
    raptureready is offline  
    Old 08-16-2010, 09:40 PM
      #17  
    Super Member
     
    weezie's Avatar
     
    Join Date: Dec 2007
    Location: Douglas County, GA
    Posts: 1,722
    Default

    On 2 quilts where I used Bali pre-cut strips, I did not wash the fabric first, knowing that some of the batik colors would run. When I finished the tops, I machine basted wide, inexpensive muslin all around the quilt top edges and then washed (gently) with color catchers. After laundering, I removed the muslin; the seam allowances were intact and the muslin prevented unwanted threads from escaping into my washing machine.
    weezie is offline  
    Old 08-16-2010, 10:32 PM
      #18  
    Super Member
     
    tooMuchFabric's Avatar
     
    Join Date: Nov 2009
    Location: TX
    Posts: 1,243
    Default

    Originally Posted by Rachelcb80
    Will prewashing my batting help keep the scrunch down? I've never prewashed batting so I don't know how to do that either. :P
    Yes, it will. You can prewash batting, which I am taking to mean cotton batting, by handling it very gently and drying it very gently.
    Works fine.
    Do not wash it in a washer, nor dry it in a dryer.
    Although a friend of mine hand-soaked her cotton batting, rinsed it by hand, and then put it in a pillowcase and pinned it closed, then dried the whole thing on warn (not hot) setting.
    Hers came out fine but I have not done the dryer thing myself.
    tooMuchFabric is offline  
    Old 08-17-2010, 04:13 AM
      #19  
    Super Member
    Thread Starter
     
    Rachelcb80's Avatar
     
    Join Date: Jan 2010
    Location: Raleigh, MS
    Posts: 1,038
    Default

    Originally Posted by weezie
    On 2 quilts where I used Bali pre-cut strips, I did not wash the fabric first, knowing that some of the batik colors would run. When I finished the tops, I machine basted wide, inexpensive muslin all around the quilt top edges and then washed (gently) with color catchers. After laundering, I removed the muslin; the seam allowances were intact and the muslin prevented unwanted threads from escaping into my washing machine.
    Okay, this sounds like the plan of action I need to take. But the only muslin I have is some nice, really soft stuff that I plan on using for a backing at some point for a cuddle quilt so I guess I need to hit the store for some cheaper stuff. Couple of questions; you just basted around all four edges right? Did you just wash on a gentle cycle? And finally what about drying? Did you dry in a dryer, or just hang to dry?
    Rachelcb80 is offline  
    Old 08-17-2010, 04:25 AM
      #20  
    Power Poster
     
    Join Date: May 2008
    Location: MN
    Posts: 24,645
    Default

    There are inexpensive muslins available.

    Or you could buy the cheapest (least expensive) sheet you can find and that would work.

    Even hand washing just a top is an iffy process. I had to wash some sections of a top (one of my cats "anointed" it - thought I had everything away from the wretch) - and there was a LOT of fraying. This was just dunking the sections in a sink and hanging them on a drying rack. Also, some of my stitching came out and I had to redo some of it.

    Warm and Natural batting machine (automatic) washes (warm or cool wash and gentle cycle) and machine dries (permanent press cycle) just fine.
    bearisgray is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Kristisnod
    Main
    27
    03-05-2021 02:31 AM
    Just-Lee
    Main
    19
    05-10-2013 01:23 PM
    grammy17
    Main
    7
    01-15-2011 08:40 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter