SURVEY for COMIC BOARD users
#41
Super Member
Join Date: Mar 2011
Location: Maryland
Posts: 2,376
I also measure the fabric before putting it on the board & then use the string price tags, with the hole in them, and put the amount of fabric that is on the board. I just cut the string off & use a cheap tiny safety pin to pin it to the fabric. The fabric that is less than a yard I measure & just fold it & put a tag on it with the amount. I love how easy it is to see what fabric I have & if I need a certain amount all I have to do is look at the tags & know if it will work or not.
#42
Super Member
Thread Starter
Join Date: Mar 2010
Location: PROFESSIONAL Longarm Quilter NW Indiana
Posts: 3,398
DONNAI - Substitute a ruler for the comic board in this link http://www.quiltingboard.com/tutoria...om-t43871.html and you'll have the ruler fold method.
NORMASEWS and DAMMAQUILTS - Looks Great!
#43
I use the large 'plastic' type paper clips to hold the fabric on my boards and slip a small piece of paper under the clip with the amount of fabric left folded on the board. I heard somewhere not to use pins or metal paper clips because they could stain thefabric and not to use rubber bands because they will mark the fabric. Jinniw
#44
Senior Member
Join Date: Jun 2011
Location: Orlando, FL
Posts: 416
Archival or Acid free comic book boards.
This is an excerpt I got off of a comic book site. "What is most important is purchasing archival safe boards (again, there are degrees to this too) ensuring proper care of books for the duration of their storage.Comic book boards have two sides to them: one side is rough and matte, the other side is smooth and glossy. Since boards are only intended to protect one comic, only one side is treated, this is the smooth side of the board. "
I interpret this to mean that only 1 side is treated to be acid free. I have used these boards myself and never thought about the claims of 'acid free'.
I then found this link which performed a test of the comic book boards. http://boards.collectors-society.com...Number=4534727. Essentially the results said "In contrast, every single buffered board (E Gerber and Bill Cole) passed the acid-free test - on these boards, both sides were pH neutral (or slightly alkaline), and as these boards are buffered throughout (not coated), the entire board can therefore be considered acid-free.
Sounds like we need to buy E Gerber's Half-Back,Bill Cole's Thin-X-Tender, or Bill Cole's Life-X-Tender boards to be truly archival safe. Of course this is not what I have.
Looks like the Bill Cole's are twice as expensive but I found the E Gerber Half back for 9.99 per 100 at comic supply ( sizes/prices vary based on size of comic book).
I interpret this to mean that only 1 side is treated to be acid free. I have used these boards myself and never thought about the claims of 'acid free'.
I then found this link which performed a test of the comic book boards. http://boards.collectors-society.com...Number=4534727. Essentially the results said "In contrast, every single buffered board (E Gerber and Bill Cole) passed the acid-free test - on these boards, both sides were pH neutral (or slightly alkaline), and as these boards are buffered throughout (not coated), the entire board can therefore be considered acid-free.
Sounds like we need to buy E Gerber's Half-Back,Bill Cole's Thin-X-Tender, or Bill Cole's Life-X-Tender boards to be truly archival safe. Of course this is not what I have.
Looks like the Bill Cole's are twice as expensive but I found the E Gerber Half back for 9.99 per 100 at comic supply ( sizes/prices vary based on size of comic book).
#47
I am now in the process of organizing my closet with using comic boards for fabric. I first ordered 300 7 x 10 1/2 from amazon and used all of them, then ordered 500 6 3/4 X 10 1/2 more from Ebay and have used 250 of them, but I haven't gotten to my Halloween and christmas fabric yet. I used my old christmas, birthday and etc cards and cut them the size of fat quarter boards and wrapped all my small pieces on them and stored them in bins or baskets. I ran out of cards and hit my 2 sisters for their old cards. I used paper clips, bobbie pins and pins. I was hoping to have my room done by now, but DH has had to work the last few days and no getting any work out of him. Will post it when done.....
#48
Banned
Join Date: Dec 2009
Location: Enid, OK
Posts: 8,273
I have a lot of my fabric stored on the boards that fabric is sold on at the LQS and Joanns. I get them free at Joann's and cut into 4 equal size boards. Have folded quite a few yards on each one and they seem to hold up just fine and the best part is they are FREE. Instead of the ladies having to take them to the dumpster I take what they have. If fabric is good enough to be wrapped and shipped on that it should be good enough for me to store my fabric on without spending more money on acid free boards that can be spent on more fabric.
#49
Banned
Join Date: Dec 2009
Location: Enid, OK
Posts: 8,273
I am now in the process of organizing my closet with using comic boards for fabric. I first ordered 300 7 x 10 1/2 from amazon and used all of them, then ordered 500 6 3/4 X 10 1/2 more from Ebay and have used 250 of them, but I haven't gotten to my Halloween and christmas fabric yet. I used my old christmas, birthday and etc cards and cut them the size of fat quarter boards and wrapped all my small pieces on them and stored them in bins or baskets. I ran out of cards and hit my 2 sisters for their old cards. I used paper clips, bobbie pins and pins. I was hoping to have my room done by now, but DH has had to work the last few days and no getting any work out of him. Will post it when done.....
Had to giggle...I did a basic COUNT and I would need over 1,000 boards! and I want the LIFE magazine size ones as they will fit my shelving better!
I LOVE the bobby pin idea..better/cheaper than bolt buddies and does the same thing. PERFECT!
Thread
Thread Starter
Forum
Replies
Last Post
Quilted Dogs
Mission: Organization
9
10-24-2012 03:47 PM