Machine Applique First Try Many Problems -- HELP!!
#12
Member
Join Date: Sep 2009
Posts: 7
I love machine applique but learned that it is not necessarily a fast process. Sometimes I have to stop and pivot every 1, 2, or 3 stitches. Unless it's something I'm making for my mother...who has worse eyesight than I do. Then it's pedal to the metal!!!
I did learn (the hard way) that the right swing of the needle should hit just the outside edge of the applique. I always tried to make the zig zag stitch straddle the applique. By using the edge of the applique as a guide my stitches became much more even.
Be gentle with yourself. Progress not perfection!!!! You're stitches look great and will only improve with time.
I did learn (the hard way) that the right swing of the needle should hit just the outside edge of the applique. I always tried to make the zig zag stitch straddle the applique. By using the edge of the applique as a guide my stitches became much more even.
Be gentle with yourself. Progress not perfection!!!! You're stitches look great and will only improve with time.
#14
I think it looks great.
I know, because I do it to myself, that we expect perfection from our projects and get frustrated. just keep trying. I also found that satin stitch didn't work for me i tried with blanket stitch or double blanket stitch and I feel better about my results. Do your machine have those stitches?
I know, because I do it to myself, that we expect perfection from our projects and get frustrated. just keep trying. I also found that satin stitch didn't work for me i tried with blanket stitch or double blanket stitch and I feel better about my results. Do your machine have those stitches?
#16
Super Member
Thread Starter
Join Date: Aug 2009
Location: The middle of an IL cornfield
Posts: 7,014
OK, maybe is just need some practice. I do like the idea of using the edge of the applique as a guide. I was kind of winging it trying to keep the stitches evenly on the applieque and the block.
I'll stick this one in my practice quilt where all it's lflaws will be in good company and keep on trying.
Thanks for the encouraging words! :D
I'll stick this one in my practice quilt where all it's lflaws will be in good company and keep on trying.
Thanks for the encouraging words! :D
#19
Senior Member
Join Date: Aug 2009
Location: Somewhere near the water in beautiful Michigan
Posts: 772
Lisa, you're doing just fine. I agree that an open-toe foot and going at a moderate to slow speed will help. Also on sharper curves, you will definitely want to stop every few stitches to adjust the piece ever so slightly to keep the curve smooth. The gentler the curve, the less often you should have to do this step.
As for the swing of the needle and pivoting, I have found that it helps to pay attention to where your needle is going to stop. Lift the presser foot, turn the piece and make sure that the needle is going to "swing" to the proper place when you start to go.
Okay, that doesn't make quite enough sense to me, either, and I've been sewing for far too long! lol
Assume you are satin stitching around a square, with the body of the square to the left of your machine. When you come to the first corner, leave the needle down on the right swing (off the edge of the square). Lift the presser foot, turn the square counter-clockwise to do the next side. Proceed. As you come to the next corner, try leaving the needle in the down position on the LEFT swing (in the body of the square). Lift the foot and rotate the piece another 90 degrees and then sew to the next corner. Now stop, remove your work and look at your corners. The first corner you did will have a little square of fabric hanging out at the corner, or an "L" shape open. The second corner you did should be completely solid.
So, as you can see, you need to pay attention to which side of the swing you need your needle to be left in the fabric and consider where the swing will take you once you turn your piece. That way you will have a nice, solid line of satin stitching.
The best advice, you've already been given: keep practicing. You're really doing just fine!
I hope this helps.
As for the swing of the needle and pivoting, I have found that it helps to pay attention to where your needle is going to stop. Lift the presser foot, turn the piece and make sure that the needle is going to "swing" to the proper place when you start to go.
Okay, that doesn't make quite enough sense to me, either, and I've been sewing for far too long! lol
Assume you are satin stitching around a square, with the body of the square to the left of your machine. When you come to the first corner, leave the needle down on the right swing (off the edge of the square). Lift the presser foot, turn the square counter-clockwise to do the next side. Proceed. As you come to the next corner, try leaving the needle in the down position on the LEFT swing (in the body of the square). Lift the foot and rotate the piece another 90 degrees and then sew to the next corner. Now stop, remove your work and look at your corners. The first corner you did will have a little square of fabric hanging out at the corner, or an "L" shape open. The second corner you did should be completely solid.
So, as you can see, you need to pay attention to which side of the swing you need your needle to be left in the fabric and consider where the swing will take you once you turn your piece. That way you will have a nice, solid line of satin stitching.
The best advice, you've already been given: keep practicing. You're really doing just fine!
I hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
SteveH
For Vintage & Antique Machine Enthusiasts
57
04-01-2015 09:33 PM