Help
12-08-2021, 10:45 AM
#2
Super Member
Join Date: Mar 2015
Location: Denver, CO
Posts: 4,258
Originally Posted by [email protected]
I have a juki exceed HZL f 600 I cannot get the feed dog to raise moving the lever side to side does nothing
* Move the drop feed knob to the left-hand side after sewing.
The feed dog will be engaged automatically when the machine starts to sew.
The feed dog will be engaged automatically when the machine starts to sew.
per https://www.manualslib.com/manual/11...page=51#manual
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
12-08-2021, 03:03 PM
#4
Power Poster
Join Date: Oct 2010
Location: Mississippi
Posts: 26,018
Did you try what OurWorkbench said to do? Also, check to see that your bobbin winder is not engaged. My Juki 2010Q won't do anything if the bobbin winder is engaged.
My final suggestion, if the machine is older, would be to put drops of oil on the places you want to move, and let it soak in. Then try raising the feed dogs again. Repeat if necessary.
My final suggestion, if the machine is older, would be to put drops of oil on the places you want to move, and let it soak in. Then try raising the feed dogs again. Repeat if necessary.
