Flat felled vs conventional seam
12-12-2021, 10:28 AM
#12
Member
Thread Starter
Join Date: Oct 2021
Location: Alabama
Posts: 42
From the old days I was always taught to avoid seams right down the middle of the quilt due to folding and considerations like that. If your fabric was wide enough that you only needed two widths, you had one width that was full down the middle, and then the other you split into two pieces, with one half width on either side of the full widths. Back in the days of 36" wide yardage, it was three full widths of the fabric going horizontally for the typical length.
It amazes me all the old, half-forgotten memories that quilting stirs up. That may be the best part of quilting, don't you think?
Last edited by RustyOne; 12-12-2021 at 10:32 AM. Reason: 'cause I can't spell
12-13-2021, 06:10 AM
#14
Power Poster
Join Date: Nov 2009
Location: Mableton, GA
Posts: 11,230
I remember my mom doing this. That must be 50-60-years ago! She's been gone a long time now. Thanks for reminding me. I think that's what I'll do with mine--a full width across the center and 2 narrower ones across the sides, so that the backing is horizontal. I do remember Gram telling me the backing would wear better without a center seam, so there must be something to that, too.
It amazes me all the old, half-forgotten memories that quilting stirs up. That may be the best part of quilting, don't you think?
It amazes me all the old, half-forgotten memories that quilting stirs up. That may be the best part of quilting, don't you think?
02-06-2022, 02:55 PM
#18
Super Member
Join Date: Aug 2018
Location: Greater Peoria, IL -- just moved!
Posts: 6,127
I went to look at my roll of batting and it still has the tags on it. It was a commercial roll (so 25 yards which is about 6-8 quilts), I bought it when I had access to my friend's long arm. I got it on a great sale from an on-line discounter (It was under 200 delivered), but this seems to be the manufacturer:
https://airlitemanufacturing.com/the...ting-on-rolls/
I judged it by ounces/length, this is 12 oz per 100 inches.
I was very happy with it, down to one last top remaining
Not sure what I will do next. A commercial roll is a lot of batting to commit to, and store, and I was lucky that it worked out for me.
https://airlitemanufacturing.com/the...ting-on-rolls/
I judged it by ounces/length, this is 12 oz per 100 inches.
I was very happy with it, down to one last top remaining
Not sure what I will do next. A commercial roll is a lot of batting to commit to, and store, and I was lucky that it worked out for me.
