String Piecing on adding machine paper
07-30-2010, 05:59 PM
#21
Super Member
Join Date: Mar 2009
Location: Central Washington State
Posts: 5,997
How fun!
I have a lot of machines that no longer work, and I have never been able to bring myself to throw out all of the tape.
I checked out your pictures - - IMPRESSIVE!
Thank you for the tutorial <wave>
I have a lot of machines that no longer work, and I have never been able to bring myself to throw out all of the tape.
I checked out your pictures - - IMPRESSIVE!
Thank you for the tutorial <wave>
07-30-2010, 06:04 PM
#23
Super Member
Join Date: Mar 2010
Location: SW Iowa
Posts: 6,550
Thanks for the tut. Now to find some paper. Probably got tossed when I moved 4 years ago but gonna look. I was considering buying a box of the paper tape for a stablizer on sides of quilts that have borders that ripple or a quilt that has no borders when quilting on the Lizzie. Hmmm just might now that I have another use for it. Maybe can split the cost with a quilty friend.
07-30-2010, 06:04 PM
#24
Power Poster
Join Date: Jul 2010
Location: SoCal
Posts: 11,917
What a wonderful idea! I have several vintage sewing machines in the living room and I have been looking for an easy paper piecing project, so anyone can try and sew/quilt on them. This way I hope to increase appreciationg for quilting and vintage machines. This is perfect. I am planning to print out your post and keep it, in plastic sheet protectors, by the machine. THANKS!
08-01-2010, 03:55 AM
#26
Super Member
Join Date: Jul 2007
Location: Winter PArk, Florida
Posts: 1,145
Originally Posted by Sue Fish
I have done miles and miles of the string piecing this way for borders, quilt blocks, etc...I use 3" wide paper and can when done, cut pieces for many many different patterns.
I like it sort of wonky rather than each piece cut exactly the same and sewn straight..but you can do either
I start with my paper in a box or in the pic you can see I use the thread holder...anything to keep it from rolling all over.
I cut my scraps anywhere from about 1" wide to 1 1/2" wide and about 3 1/2" long.
First you lay one piece right side up on the end of your paper...lay the next strip face down on that and sew as shown using 1/4" seam allowance.. Flip it back and finger press and then lay the next piece face down on that and repeat...I like to sew them at a little angle here and there to make them "wonky".....continue on as long as you like but I find normally I stopped at about 1 yard of the piecing and trimmed it as shown and then rolled it up and continued on...make sense?
I like it sort of wonky rather than each piece cut exactly the same and sewn straight..but you can do either
I start with my paper in a box or in the pic you can see I use the thread holder...anything to keep it from rolling all over.
I cut my scraps anywhere from about 1" wide to 1 1/2" wide and about 3 1/2" long.
First you lay one piece right side up on the end of your paper...lay the next strip face down on that and sew as shown using 1/4" seam allowance.. Flip it back and finger press and then lay the next piece face down on that and repeat...I like to sew them at a little angle here and there to make them "wonky".....continue on as long as you like but I find normally I stopped at about 1 yard of the piecing and trimmed it as shown and then rolled it up and continued on...make sense?
08-01-2010, 04:31 AM
#27
Banned
Thread Starter
Join Date: Mar 2010
Location: Connecticut shoreline
Posts: 2,024
Originally Posted by mar32428
Originally Posted by Sue Fish
I have done miles and miles of the string piecing this way for borders, quilt blocks, etc...I use 3" wide paper and can when done, cut pieces for many many different patterns.
I like it sort of wonky rather than each piece cut exactly the same and sewn straight..but you can do either
I start with my paper in a box or in the pic you can see I use the thread holder...anything to keep it from rolling all over.
I cut my scraps anywhere from about 1" wide to 1 1/2" wide and about 3 1/2" long.
First you lay one piece right side up on the end of your paper...lay the next strip face down on that and sew as shown using 1/4" seam allowance.. Flip it back and finger press and then lay the next piece face down on that and repeat...I like to sew them at a little angle here and there to make them "wonky".....continue on as long as you like but I find normally I stopped at about 1 yard of the piecing and trimmed it as shown and then rolled it up and continued on...make sense?
I like it sort of wonky rather than each piece cut exactly the same and sewn straight..but you can do either
I start with my paper in a box or in the pic you can see I use the thread holder...anything to keep it from rolling all over.
I cut my scraps anywhere from about 1" wide to 1 1/2" wide and about 3 1/2" long.
First you lay one piece right side up on the end of your paper...lay the next strip face down on that and sew as shown using 1/4" seam allowance.. Flip it back and finger press and then lay the next piece face down on that and repeat...I like to sew them at a little angle here and there to make them "wonky".....continue on as long as you like but I find normally I stopped at about 1 yard of the piecing and trimmed it as shown and then rolled it up and continued on...make sense?
08-01-2010, 04:37 AM
#28
Super Member
Join Date: Jul 2007
Location: Winter PArk, Florida
Posts: 1,145
Originally Posted by Sue Fish
Originally Posted by mar32428
Originally Posted by Sue Fish
I have done miles and miles of the string piecing this way for borders, quilt blocks, etc...I use 3" wide paper and can when done, cut pieces for many many different patterns.
I like it sort of wonky rather than each piece cut exactly the same and sewn straight..but you can do either
I start with my paper in a box or in the pic you can see I use the thread holder...anything to keep it from rolling all over.
I cut my scraps anywhere from about 1" wide to 1 1/2" wide and about 3 1/2" long.
First you lay one piece right side up on the end of your paper...lay the next strip face down on that and sew as shown using 1/4" seam allowance.. Flip it back and finger press and then lay the next piece face down on that and repeat...I like to sew them at a little angle here and there to make them "wonky".....continue on as long as you like but I find normally I stopped at about 1 yard of the piecing and trimmed it as shown and then rolled it up and continued on...make sense?
I like it sort of wonky rather than each piece cut exactly the same and sewn straight..but you can do either
I start with my paper in a box or in the pic you can see I use the thread holder...anything to keep it from rolling all over.
I cut my scraps anywhere from about 1" wide to 1 1/2" wide and about 3 1/2" long.
First you lay one piece right side up on the end of your paper...lay the next strip face down on that and sew as shown using 1/4" seam allowance.. Flip it back and finger press and then lay the next piece face down on that and repeat...I like to sew them at a little angle here and there to make them "wonky".....continue on as long as you like but I find normally I stopped at about 1 yard of the piecing and trimmed it as shown and then rolled it up and continued on...make sense?
Thread
Thread Starter
Forum
Replies
Last Post
onaemtnest
Links and Resources
10
03-27-2015 08:30 AM
craftybear
Links and Resources
13
05-08-2011 01:56 AM
craftybear
Links and Resources
0
04-26-2011 01:03 PM
