Japanese zig-zag deluxe - stitch length/presser foot issues

Reply Subscribe

Page 2 of 2

Thread Tools

12-27-2012, 06:29 PM

#11

miriam

Power Poster

Join Date: Mar 2011

Location: Somewhere

Posts: 15,506

It works on can openers, treadle bases, bikes, doors, I can't think what all I've used it on.

12-28-2012, 01:13 AM

#12

J Miller

Super Member

Join Date: Feb 2012

Posts: 8,091

Don't forget to shake it up each time you use it. That gets the good stuff inside well mixed.

Joe

12-28-2012, 01:31 AM

#13

miriam

Power Poster

Join Date: Mar 2011

Location: Somewhere

Posts: 15,506

I attached a bent coffee stirring stick with a pony tail tie to put the spout in so I could keep track of it when I put the lid on. Yeah keep shaking it. It is easy to forget to shake it.

12-29-2012, 08:27 AM

#14

daisywreath

Member

Thread Starter

Join Date: Dec 2012

Posts: 7

All fixed up now! It's sewing beautifully now, stitch length adjuster is working perfectly. I swapped it out into a portable case from another machine that's in rougher shape that I haven't finished working on yet (need to replace the needle plate due to a bit of rust, needle thread keeps breaking and I think that's the culprit). That one has a portable case that was pretty filthy when I got it, but it's one of the plastic ones and it cleaned up really nicely. I hate to take this machine out of it's wood cabinet since they look so pretty together, but it's going to my stepdaughter, and she really needs a portable machine.

And Joe, thank you for the identification info! I tried a google search on those numbers but struck out completely, and it was making me a little nuts not being able to figure out who made it. The other machine I mentioned above, which has a Dressmaker label on it, has the same numbers stamped on the bottom. Hopefully I'll be able to get that one fixed up next. It's in rougher shape and has some rust here and there, but I think it'll sew really nicely once I get the problems worked out.

I'm going to need to figure out what to do with these sewing machines I keep bringing home -- I keep seeing them selling for $10-15 at auctions and "rescuing" them

Cheaper than stray kittens, I suppose!

12-29-2012, 08:53 AM

#15

J Miller

Super Member

Join Date: Feb 2012

Posts: 8,091

daisywreath,

If you join the Yahoo Japanese machine group you can access their data base. That is where I got the info on the J-A numbers.
{ http://groups.yahoo.com/group/vintag...ewingmachines/ }

I don's spend too much time there as I'm spread pretty thin on my other forums, but there is a tremendous amount of info available.

Joe