Cutting fabric for Log Cabin block
05-14-2014, 04:53 AM
#21
Power Poster
Join Date: Jan 2011
Location: Southern USA
Posts: 15,915
I use the Go Log Cabin die. The strips are all cut the exact length. I lay the fabric on the die lengthwise unless I'm using scraps. I don't have the patience to check each scrap for what wise it is.
05-14-2014, 05:53 AM
#22
Super Member
Join Date: Jan 2008
Location: Winchester, VA
Posts: 1,552
Originally Posted by nannyrick.com
Is there a right or wrong way to cut the logs? Do you cut on the cross grain
or length of the grain.'Thanks.
or length of the grain.'Thanks.
05-14-2014, 06:54 AM
#23
Super Member
Join Date: Apr 2012
Location: Texas
Posts: 2,369
For the only log cabin I've made, I did as Dunster and others have -- cut my pieces to size at the start. Frankly, it never occurred to me -- until now, reading these posts -- that it's sometimes done another way. Mine turned out okay, I think....though it's still not quilted. (Dang those unquilted tops; they just seem to multiply!)
It amuses me, at times, to now realize how little I knew when I began this hobby. It helped, I think, that I didn't know how much I didn't know!
It amuses me, at times, to now realize how little I knew when I began this hobby. It helped, I think, that I didn't know how much I didn't know!
05-14-2014, 12:28 PM
#25
Super Member
Join Date: May 2010
Location: Somewhere neat!
Posts: 1,146
I have seen pros and cons for cutting the strips to size - and I did a block the two different ways (1 block each) - I found that while the free cutting (let's call it) made me feel good and produced a nice block - - the pre-cutting the lengths helped me to stay "square" - - prevented me from getting just that smidgen off that you don't notice until it has exaggerated itself over a couple of rows. In spite of the fact I am a new enough quilter to get queasy about cutting too many blocks or strips ahead of time - - I found my best block in the experiment to keep me on track was to cut the strips to size in advance.
Anyway, I will probably still go ahead and do it as the mood hits me. :-)
Marysewfun
Anyway, I will probably still go ahead and do it as the mood hits me. :-)
Marysewfun
05-14-2014, 08:12 PM
#27
Super Member
Join Date: Jan 2010
Location: Some where in way out West Texas
Posts: 3,041
Originally Posted by HouseDragon
I use Judy Martin's method of cutting all the strips in advance and sorting them by size & colour (light and dark). Cutting goes quickly.
I also use a design wall to create eight blocks at a time. Then I take a photo of the eight blocks and start chain piecing.
If there's a mixup, I have the photo to put things back the way they were designed. The flimsy I'm going to send to a longarmer has at least 150 different light and dark pinks* for my granddaughter who LOVES PINK!
*To get that many, I fudged the definition of "pink" to include pinkish apricots and pinkish purples .....
I also use a design wall to create eight blocks at a time. Then I take a photo of the eight blocks and start chain piecing.
If there's a mixup, I have the photo to put things back the way they were designed. The flimsy I'm going to send to a longarmer has at least 150 different light and dark pinks* for my granddaughter who LOVES PINK!
*To get that many, I fudged the definition of "pink" to include pinkish apricots and pinkish purples .....
05-14-2014, 08:18 PM
#28
Super Member
Join Date: Jan 2010
Location: Some where in way out West Texas
Posts: 3,041
Originally Posted by mme3924
For the only log cabin I've made, I did as Dunster and others have -- cut my pieces to size at the start. Frankly, it never occurred to me -- until now, reading these posts -- that it's sometimes done another way. Mine turned out okay, I think....though it's still not quilted. (Dang those unquilted tops; they just seem to multiply!)
It amuses me, at times, to now realize how little I knew when I began this hobby. It helped, I think, that I didn't know how much I didn't know!
It amuses me, at times, to now realize how little I knew when I began this hobby. It helped, I think, that I didn't know how much I didn't know!
05-15-2014, 03:30 AM
#29
Super Member
Join Date: Jul 2010
Location: Wi
Posts: 9,232
Originally Posted by ckcowl
I too cut my logs the way dunster does-to size to begin with. Gives me nice precise blocks start to finish, lengthwise if cutting from yardage, if using scraps I cut whichever way I need to for the size log✳
Thread
Thread Starter
Forum
Replies
Last Post
AngelinaMaria
Main
7
02-13-2013 07:49 AM
