Go Back  Quiltingboard Forums >
  • Main
  • Marking problem >
  • Marking problem

  • Marking problem

    Thread Tools
     
    Old 12-27-2014, 06:41 PM
      #1  
    Member
    Thread Starter
     
    Join Date: Dec 2014
    Posts: 4
    Default Marking problem

    I'm trying to mark a stencil quilting pattern on my quilt and can't get anything to show up on the material.

    I've used white, pink and blue washable fabric pencils and an air eraser pen. Nothing works.

    What else can I use?
    Attached Thumbnails Click image for larger version

Name:	Quilt 12-27-14.jpg
Views:	1534
Size:	40.7 KB
ID:	503890  
    Kntry is offline  
    Old 12-27-2014, 07:00 PM
      #2  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    Try a sliver of white bar soap. (Not sure how you can get it down to a sliver if you don't have a used bar handy, though.)
    Prism99 is offline  
    Old 12-27-2014, 07:20 PM
      #3  
    Member
     
    Join Date: Nov 2014
    Location: Terrace, BC
    Posts: 42
    Default

    Have you tried fixion felt pens? Or maybe tailors chalk.
    Marsha12 is offline  
    Old 12-27-2014, 07:24 PM
      #4  
    Power Poster
     
    Join Date: Mar 2013
    Location: Corpus Christi, Tx.
    Posts: 16,105
    Default

    First I like your quilt. If you use a bar soap do not get one that is scented at all. Have you tried the chalk or that pounce thing? Tailor's chalk is supposed to be good for marking. I believe Ivory soap is unscented. warm a sharp knife under some hot water cut a sliver off and try that. be careful with the sharp knife.
    tessagin is offline  
    Old 12-27-2014, 08:17 PM
      #5  
    Super Member
     
    mike'sgirl's Avatar
     
    Join Date: May 2012
    Location: starke,Florida
    Posts: 2,025
    Default

    I was going to suggest chalk as well, or a ceramic pencil. Fons and Porter make one that I have heard many quilters like.
    mike'sgirl is offline  
    Old 12-27-2014, 08:31 PM
      #6  
    Super Member
     
    GailG's Avatar
     
    Join Date: May 2008
    Location: Louisiana
    Posts: 6,764
    Default

    I have been very successful with unscented Dove soap. I use the bar until it's flat and has thin edges. Let it dry very well and store in a covered jar. I have a problem using thin pieces of soap in the bath because of arthritis in the fingers. Learned years ago to stick the new wet bar to the old wet bar and l let it dry very well. Usually it sticks the first time. Then I can continue to use the "double bar" until the old bar in time is used up. But I do keep slivers for marking. [Not sure what the soap will do to my sewing machine.]

    Last edited by GailG; 12-27-2014 at 08:34 PM.
    GailG is offline  
    Old 12-27-2014, 08:31 PM
      #7  
    Power Poster
     
    Join Date: Mar 2011
    Location: Ontario, Canada
    Posts: 41,481
    Default

    If you are machine quilting, you could make tissue paper patterns to stitch through. (There is a product called Golden Thread paper that you can stitch through also.) With tissue paper, cut several squares the size of your block, draw the pattern on one square, stack up your squares and pin the corners, stitch over the drawn pattern with the machine needle without thread, take the pins out of the squares and you will have several copies to pin on the sandwich and stitch the pattern. Carefully tear away the tissue when finished.
    Tartan is offline  
    Old 12-27-2014, 08:37 PM
      #8  
    Super Member
     
    Join Date: Mar 2013
    Location: Southern Indiana
    Posts: 3,111
    Default

    I like Tartan's suggestion.. tho I have never done that it sounds like its worth a try. I may try that myself sometime. I personally don't enjoy the pounce chalk, but it will mark on that dark fabric. I have a hard time keeping the pounce chalk from wiping off while I sew. I would advise against the blue pounce... I like the idea of using soap, I may try that as well.
    meyert is offline  
    Old 12-27-2014, 10:13 PM
      #9  
    Senior Member
     
    Terri D.'s Avatar
     
    Join Date: Mar 2014
    Posts: 462
    Default

    Try water soluble stabilizer. It works great!
    Terri D. is offline  
    Old 12-28-2014, 01:57 AM
      #10  
    Senior Member
     
    cindi's Avatar
     
    Join Date: May 2011
    Location: Central Ohio
    Posts: 989
    Default

    I use soap slivers a lot, too. When the edge gets dull, just shave it down with a box cutter....
    cindi is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    susie-susie-susie
    Main
    30
    03-31-2014 05:48 PM
    SlightlyOffQuilter
    Tutorials
    10
    02-24-2014 12:07 PM
    DeMaris
    Main
    13
    12-17-2011 11:27 AM
    NewsletterBot
    Main
    3
    09-11-2007 04:54 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter