Shopping for sewing table--machine on top or inset?
#21
I have wondered about the insert system. Both my machines are table top. And I too, get a sore back/neck so I've learned to take frequent breaks. However, I am tall and I find I need to slump/crouch to clearly see the needle+ particularly when I FMQ. A lower chair makes it awkward for my arms. I can't but think an insert would make the whole situation worse?
#22
Senior Member
Join Date: Feb 2010
Location: South Central Missouri
Posts: 333
This is one I've been looking at instead of trying to make one. Also I have the adjustable Sewing Mates insert. It adjust for whatever machine you use. I love it. Check it out here sewperfecttable.com
http://sewperfecttables.com/sewing-table-original.shtml
http://sewperfecttables.com/sewing-table-original.shtml
#25
Member
Join Date: Feb 2014
Posts: 19
I bought a sewing table with a custom insert and my machine sits level with it....in front of that I bought 2 tables at Home Depot ( the kind you set up for a party) and put one in front of the machine table and one to the left of the machine in a L shape and it works perfectly while quilting and cutting out fabric.
#26
Senior Member
Join Date: Sep 2011
Location: Central NY
Posts: 859
For under $150, including shipping, you can get a Gidget table for a regular size machine, that will allow the machine to recess, or be on top. You can buy a SewSteady insert to fit any machine for about $69-$65. If you have a larger machine you can get a Gidget II for about $250, and I think that includes the insert.
The tables are 42"x19" and quite sturdy. I have to butt them up to a larger table to quilt, but they are fine for piecing.
The tables are 42"x19" and quite sturdy. I have to butt them up to a larger table to quilt, but they are fine for piecing.
#27
Super Member
Join Date: Aug 2010
Location: Central Iowa
Posts: 2,335
I have a very old cabinet my husband took out the old machine made the opening large enough to put my machine in he also installed a lift it is really nice I don't remember how much the lift was but I am thinking around $100.
He also made the insert to match the cabinet.
He also made the insert to match the cabinet.
#28
Super Member
Join Date: Mar 2012
Location: Kenai, Alaska
Posts: 1,150
I would love to have a desk with the machine on the level with the top of the desk. I use an extension on my machine but that isn't the same thing. Still have to lift arms up to stitch and it isn't even with the top of the desk so the quilt hangs over the sides.
#30
Senior Member
Join Date: Nov 2011
Posts: 368
I bought a computer desk which is kind of straight C shaped /-----\. On sale at Staples for about $100. The middle section has a drop down area for your keyboard. I put my machine on that section for most general sewing, but can raise it up to the height of the rest of the cabinet if I want to use the free arm feature. Make sure you measure your machine's footprint if you go this route. Many newer machines are quite large and won't fit the smaller openings.
Thread
Thread Starter
Forum
Replies
Last Post