There's Got to be an easier way!
#31
Super Member
Join Date: Aug 2010
Location: Kansas City, Missouri
Posts: 1,040
I have a small house and not much space either of wall or floor or furniture for that matter. I do a lot of layout on top of our queen bed, it may be hard on the back but it's easier than the floor! Currently I use an old cutting mat that I slide under the part of the quilt I need to pin. Then as I go along I just move the cutting board. It seems to work well for me. On a large quilt like the one in the picture I only work for 30 minutes or so and then stand up to rest my back and attend to another chore and then come back later.
#32
Senior Member
Join Date: Jul 2015
Posts: 594
I wouldn't be quilting if I couldn't spray baste. It's so much quicker, easier on the back, and I don't have a problem with puckers on the back.
As sensitive as I am to odors, surprisingly, the 505 spray doesn't bother me. There is a slight smell, but you use such a small amount, it isn't an issue.
As sensitive as I am to odors, surprisingly, the 505 spray doesn't bother me. There is a slight smell, but you use such a small amount, it isn't an issue.
#33
Super Member
Join Date: Dec 2010
Location: Dallas area, Texas, USA
Posts: 3,050
Last year I ran across this (kinda funny) video and have had great success pin basting large quilts on my kitchen table this way. https://youtu.be/jnke_KzeTI8
...
...
#34
Senior Member
Join Date: Dec 2016
Location: Upstate SC
Posts: 683
We have had similar discussions before. I found success using pool noodles stabilized with pieces of pvc. Here is a link to one of the discussions.
Basting with pool noodles..
Basting with pool noodles..
#35
This sounds like an excellent plan quilterpurpledog! I may have to try it. I'm going to check into the Elmer's school glue method on YouTube also. BTW all the ideas here are great ideas. Thanks for sharing with us.
I use a 30 X 72 table and clamps. I use the clamps to hold the first section of the backing; smooth on the batting and lay on the top. I pin or glue (Elmer's) that first section. If I use the glue method I let it dry completely. Then, I move that section off the table and used the clamps to fasten a new section to the table with the clamps and repeat the process. I have good success using this method and I can walk when I'm finished. I could not do the hands and knees thing! You might also look up Sharon Schambler's video on using boards that are 1 X 4's. I like that method also.
#36
https://www.youtube.com/watch?v=MikOtzRqgNY
This way with the pool noodles won't help with putting your borders on, but it will help with basting the quilt top to quilt it.
Marcia in TX
This way with the pool noodles won't help with putting your borders on, but it will help with basting the quilt top to quilt it.
Marcia in TX
#39
I used to love the fusible batting made by Hobbs, and would do it on the garage floor, but I can't seem to find it anymore, so between that and my knees and back not getting any younger, I gave up on the floor. But even if I had a table big enough to hold an entire queen or king-sized quilt, I wouldn't be able to reach into the center of it to fuse, pin or smooth down a spray basted quilt. So I join the ranks of those who pin in sections using the clamp method.
Thread
Thread Starter
Forum
Replies
Last Post
thequiltmama
Main
20
11-07-2010 12:25 PM